Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Dodge Viper Control Arm Bushing

Suspension Arm Bushing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arm Bushings found

  • 2008 Dodge Viper Control Arm Bushing - 4848052AB
    2008 Dodge Viper Control Arm Bushing Diagram - 4848052AB
    View related parts

    2008 Dodge Viper Lower Control Arm Front Bushing, Rear Part Number: 4848052AB

    $55.04 MSRP: $65.85
    You Save: $10.81 (17%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bushing; Suspension Control Arm Bushing, Rear Lower; Axle Beam Mount; Control Arm Bushing
    • Position: Rear Lower
    • Item Weight: 1.30 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4848052AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Viper Submodels:
    • SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
  • 2008 Dodge Viper Control Arm Bushing - 4848050
    2008 Dodge Viper Control Arm Bushing Diagram - 4848050
    View related parts

    2008 Dodge Viper Lower Control Arm Bushing, Front Part Number: 4848050

    Product Specifications
    • Other Name: Bushing - Control Arm; Front Lower Suspension Control Arm Bushing; Axle Pivot Bushing; Axle Beam Mount; Lower Control Arm Rear Bushing; Bushing Control Arm; Control Arm Bushing
    • Position: Front Lower
    • Item Weight: 0.90 Pounds
    • Item Dimensions: 2.6 x 2.0 x 2.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4848050
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Viper Submodels:
    • ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2008 Dodge Viper Control Arm Bushing Parts and Q&A

  • Q: How to Remove and Install Control Arm Bushing for the Front Lower Control Arm on 2008 Dodge Viper?
    A: You should first separate the lower control arm from the vehicle and use vise with soft jaw caps to help keep it safe. Set the bushing that you want to remove closest to the jaws inside the vise and lock the lower control arm on top. Prior to using Special Tool 6969B, grease the threads on Screw Assembly 6969-3. Join the two parts of Remover/Installer and insert Special Tool 6969B through the bushing. Special Tool 6969B should only be handled with hand tools, not impact wrenches. After removing the arm, pay attention, as a little bit of the rubber bushing could fall between the Remover and the bushing bore inside the control arm, causing some obstruction. Secure Screw 4 of Special Tool 6969-3, then turn Nut 1 of Special Tool 6969-4 clockwise to pull the isolator bushing from the control arm into Receiver, Special Tool 6969-2. When installing the bushing, use the correct methods for the front lower, stabilizer bar and upper control arm bushings.

Related 2008 Dodge Viper Parts

Alternate Year Models

+
2009 Dodge Viper Control Arm Bushing