How to Service and Repair a Steering Knuckle on 2008 Dodge Viper?

Start by raising and supporting the vehicle and then take off the wheel and tire. At this stage, separate the brake caliper from the knuckle and hang it off the wheel so you can easily remove the rotor. Loose the bolt between the ABS wheel speed sensor head and the steering knuckle to release the sensor head. Once that's done, remove both the retaining bolt and the ABS tone wheel from the hub and bearing. Afterward, using Special Tool C-4150A, carefully detach the outer tie rod from the knuckle so you don't damage the tie rod grease seal. Take out the outer tie rod from the knuckle with the same tool and then remove the bolts on the hub and bearing as well. Last, take the hub and bearing assembly from the knuckle and use the right tool to remove the tone wheel seal from the knuckle.

OEM 2008 Dodge Viper Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2008 Dodge Viper Knuckle, Front Driver Side Part Number: 68272307AA
$1092.85 MSRP: $1665.00
You Save: $572.15 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left, Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 5290031AC, 5290031AF
- Item Weight: 18.90 Pounds
- Item Dimensions: 17.4 x 14.8 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68272307AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT, SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
2008 Dodge Viper Knuckle, Front Passenger Side Part Number: 68272306AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right, Right; Knuckle Front
- Position: Front Passenger Side
- Replaces: 5290030AF, 5290030AC
- Item Weight: 20.70 Pounds
- Item Dimensions: 12.5 x 12.4 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68272306AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT, SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.4L V10

2008 Dodge Viper Steering Knuckle Parts and Q&A

Q: How to Service and Repair a Steering Knuckle on 2008 Dodge Viper?
A: Start by raising and supporting the vehicle and then take off the wheel and tire. At this stage, separate the brake caliper from the knuckle and hang it off the wheel so you can easily remove the rotor. Loose the bolt between the ABS wheel speed sensor head and the steering knuckle to release the sensor head. Once that's done, remove both the retaining bolt and the ABS tone wheel from the hub and bearing. Afterward, using Special Tool C-4150A, carefully detach the outer tie rod from the knuckle so you don't damage the tie rod grease seal. Take out the outer tie rod from the knuckle with the same tool and then remove the bolts on the hub and bearing as well. Last, take the hub and bearing assembly from the knuckle and use the right tool to remove the tone wheel seal from the knuckle.