How to Service Sway Bar Bushings on the Front Stabilizer on 2008 Dodge Viper?

Before servicing the front sway bar bushings, you must raise and support the vehicle, always minding all safety tips. After that, release the two bolts attaching each sway bar bushing retainer to the frame rails. After the retainers have been removed, slide them down the bushings. The final step is to remove each bushing from the sway bar by cutting the seal, pulling apart the bushing and peeling it off the bar.

OEM 2008 Dodge Viper Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sway Bar Bushing found

View related parts
2008 Dodge Viper Stabilizer Bar Bushing, Rear Part Number: 4643004
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front, Rear; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar; Bushing
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.2 x 1.8 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4643004
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- ACR, Base, GT, GT2, GTC, GTS, R/T-10, SRT, SRT-10, SRT-10 ACR | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2008 Dodge Viper Sway Bar Bushing Parts and Q&A

Q: How to Service Sway Bar Bushings on the Front Stabilizer on 2008 Dodge Viper?
A: Before servicing the front sway bar bushings, you must raise and support the vehicle, always minding all safety tips. After that, release the two bolts attaching each sway bar bushing retainer to the frame rails. After the retainers have been removed, slide them down the bushings. The final step is to remove each bushing from the sway bar by cutting the seal, pulling apart the bushing and peeling it off the bar.