Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Dodge Viper Control Arm Bushing

Suspension Arm Bushing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arm Bushings found

  • 2009 Dodge Viper Control Arm Bushing - 4848052AB
    2009 Dodge Viper Control Arm Bushing Diagram - 4848052AB
    View related parts

    2009 Dodge Viper Lower Control Arm Front Bushing, Rear Part Number: 4848052AB

    $55.04 MSRP: $65.85
    You Save: $10.81 (17%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bushing; Suspension Control Arm Bushing, Rear Lower; Axle Beam Mount; Control Arm Bushing
    • Position: Rear Lower
    • Item Weight: 1.30 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4848052AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Dodge Viper Submodels:
    • SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
  • 2009 Dodge Viper Control Arm Bushing - 4848050
    2009 Dodge Viper Control Arm Bushing Diagram - 4848050
    View related parts

    2009 Dodge Viper Lower Control Arm Bushing, Front Part Number: 4848050

    Product Specifications
    • Other Name: Bushing - Control Arm; Front Lower Suspension Control Arm Bushing; Axle Pivot Bushing; Axle Beam Mount; Lower Control Arm Rear Bushing; Bushing Control Arm; Control Arm Bushing
    • Position: Front Lower
    • Item Weight: 0.90 Pounds
    • Item Dimensions: 2.6 x 2.0 x 2.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4848050
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Dodge Viper Submodels:
    • ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2009 Dodge Viper Control Arm Bushing Parts and Q&A

  • Q: How to Remove Control Arm Bushing from the Front Lower Control Arm on 2009 Dodge Viper?
    A: The first step is to detach the control arm from the vehicle and when using a vise, protect the control arm with soft jaw caps to stop any damage. Put the lower control arm into the vise with the bushing you want to remove sitting inside the vise where the jaws are. Oil the threads on Screw Assembly 6969-3 with a proper lubricant before using Special Tool 6969B. Attach the components of Remover/Installer, Special Tool 6969B, together through the bushing. Only manual tools should be used on Special Tool 6969B; never use an impact wrench. When removing the tools through the arm, notice that a bit of bushing rubber could land between the Remover and the control arm rubber bore, adding extra resistance you may feel. While holding Screw 4 in place, rotate Nut 1 on Special Tool 6969-4, moving the isolator bushing from the control arm and into Receiver, Special Tool 6969-2. Work through the instructions for fitting the Front Suspension Stabilizer Bar Bushing during the bushing installation.

Related 2009 Dodge Viper Parts

Alternate Year Models

+
2008 Dodge Viper Control Arm Bushing 2010 Dodge Viper Control Arm Bushing