How to Install a Brake Fluid Level Sensor on 2009 Jeep Commander?

The first action is to put the sensor into the reservoir, using a new o-ring, until the locking tabs hold in place. After that, link the wire to the fluid level sensor.

OEM 2009 Jeep Commander Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2009 Jeep Commander Fluid Level Sensor Part Number: 5013903AA
Product Specifications
- Other Name: Sensor - Brake Fluid Level; Brake Fluid Level Switch; Fluid Sensor; Sensor Brake Fluid Level
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5013903AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Brake Fluid Level Sensor Parts and Q&A

Q: How to Install a Brake Fluid Level Sensor on 2009 Jeep Commander?
A: The first action is to put the sensor into the reservoir, using a new o-ring, until the locking tabs hold in place. After that, link the wire to the fluid level sensor.