OEM 2009 Chrysler PT Cruiser A/C Switch

2009 Chrysler PT Cruiser A/C Switch Parts and Q&A

• Q: How to Install the A/C Switch for Temperature Control on 2009 Chrysler PT Cruiser?

  A: You should place the A/C-heater control (8) onto the instrument panel center bezel (7) and hold it in place by inserting four screws (6) and attaching them with it hand tightening each screw to 2 Nm (17 in. lbs.) Subsequently, fix the center bezel at the instrument panel and insert the wire harness connectors (3 and 4) into the back of the A/C-heater control. After that, add the control cables (1 and 9) to the mode door control lever (2) and the temperature control lever (5) and check that the retaining clips are securely in place. Then, fit the wire harness connectors to the accessory switches, power window switches and clock (as supplied) and set the central bezel in its place. In the end, plug the negative battery cable back in place.