How to Install the A/C Switch for Temperature Control on 2008 Chrysler PT Cruiser?

Point the A/C-heater control into its position in the instrument panel center bezel, then use four screws to attach it and tighten them to 17 in. lbs. After that, line up the center bezel with the instrument panel and link the wire harness connectors (3 and 4) to the rear of the A/C-heater control. Afterward, link control cables 1 and 9 to the mode door control lever and the temperature control lever, so the retaining clips are completely in place and hold them secure. After that, connect each accessory switch, power window switch and clock to the wires and secure the center bezel. Wrench off the cap and reattach the negative battery cable.

OEM 2008 Chrysler PT Cruiser A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Switch found

View related parts
2008 Chrysler PT Cruiser Heater Control Part Number: 55111879AC
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit; Control A/C And Heater
- Replaces: 55111844AF, 55111844AE, 55111844AI, 55111879AA, 55111844AJ, 55111844AM, 55111879AB, 55111844AL, 55111844AC, 55111844AG, 55111844AH, 55111844AK, 55111844AD
- Item Weight: 1.40 Pounds
- Item Dimensions: 10.5 x 4.7 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55111879AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2008 Chrysler PT Cruiser A/C Switch Parts and Q&A

Q: How to Install the A/C Switch for Temperature Control on 2008 Chrysler PT Cruiser?
A: Point the A/C-heater control into its position in the instrument panel center bezel, then use four screws to attach it and tighten them to 17 in. lbs. After that, line up the center bezel with the instrument panel and link the wire harness connectors (3 and 4) to the rear of the A/C-heater control. Afterward, link control cables 1 and 9 to the mode door control lever and the temperature control lever, so the retaining clips are completely in place and hold them secure. After that, connect each accessory switch, power window switch and clock to the wires and secure the center bezel. Wrench off the cap and reattach the negative battery cable.