How to install a Brake Proportioning Valve on 2009 Dodge Caliber?

To install the brake proportioning valve, hold it in the port of the master cylinder and tighten to 30 Nm. Connect the brake tube and tighten nut to 17Nm. Remove the brake pedal holder, bleed the brake line(s) and perform a road test to make sure the brakes are functioning properly.

OEM 2009 Dodge Caliber Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Proportioning Valves found

View related parts
2009 Dodge Caliber Valve Part Number: 5175703AA
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve Proportioning
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.3 x 0.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175703AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Valve Part Number: 5175702AA
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve Proportioning
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.4 x 0.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175702AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Dodge Caliber Brake Proportioning Valve Parts and Q&A

Q: How to install a Brake Proportioning Valve on 2009 Dodge Caliber?
A: To install the brake proportioning valve, hold it in the port of the master cylinder and tighten to 30 Nm. Connect the brake tube and tighten nut to 17Nm. Remove the brake pedal holder, bleed the brake line(s) and perform a road test to make sure the brakes are functioning properly.