Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Dodge Caliber Brake Master Cylinder

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

  • 2009 Dodge Caliber Brake Master Cylinder - 5175701AA
    2009 Dodge Caliber Brake Master Cylinder Diagram - 5175701AA
    View related parts

    2009 Dodge Caliber Master Cylinder Part Number: 5175701AA

    $90.92 MSRP: $151.00
    You Save: $60.08 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
    • Item Weight: 3.20 Pounds
    • Item Dimensions: 10.1 x 10.2 x 7.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5175701AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Dodge Caliber Submodels:
    • Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
  • 2009 Dodge Caliber Brake Master Cylinder - 5175093AB
    2009 Dodge Caliber Brake Master Cylinder Diagram - 5175093AB
    View related parts

    2009 Dodge Caliber Master Cylinder Part Number: 5175093AB

    $220.45 MSRP: $307.00
    You Save: $86.55 (29%)
    ADD TO CART
    Product Specifications
    • Other Name: Cylinder - Brake; Brake Master Cylinder; Clutch Master Cylinder; Master Cylinder Brake
    • Replaces: 5175093AA
    • Item Weight: 1.90 Pounds
    • Item Dimensions: 10.1 x 6.0 x 5.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5175093AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Dodge Caliber Submodels:
    • Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Dodge Caliber Brake Master Cylinder Parts and Q&A

  • Q: How to Remove and Replace a Brake Master Cylinder with ABS on 2009 Dodge Caliber?
    A: Before anything else, put pressure on the brake pedal 4-5 times without running the engine to remove any vacuum from the power brake booster. Disconnect one end of the negative ground cable from the battery and separate that section. After that, separate the wiring connector from the brake fluid level switch in the master cylinder brake fluid reservoir. Separate the main and emergency brake tubes at the connections on the master cylinder and then put plugs into all the open tube outlets there. Remove the clamp from a manual transaxle and take the clutch actuator hose off the reservoir port. Wipe the area by the master cylinder attachment, where the power brake booster is fastened, with a proper brake cleaner. Afterward, disconnect the nuts securing the master cylinder to the booster and push it all the way out of the booster housing.

Related 2009 Dodge Caliber Parts

Alternate Year Models

+
2008 Dodge Caliber Brake Master Cylinder 2010 Dodge Caliber Brake Master Cylinder