How to Remove a Brake Proportioning Valve on 2010 Dodge Caliber?

In order to disconnect the Brake Proportioning/Combination Valve, push the brake pedal farther than an inch in order to isolate the master cylinder. To have a better access, it is possible to remove the air cleaner cover. Next, remove the brake tube by removing it off the valve and screw the valve off the master cylinder.

OEM 2010 Dodge Caliber Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Proportioning Valves found

View related parts
2010 Dodge Caliber Valve Part Number: 5175703AA
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve Proportioning
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.3 x 0.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175703AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Valve Part Number: 5175702AA
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve Proportioning
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.4 x 0.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175702AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Brake Proportioning Valve Parts and Q&A

Q: How to Remove a Brake Proportioning Valve on 2010 Dodge Caliber?
A: In order to disconnect the Brake Proportioning/Combination Valve, push the brake pedal farther than an inch in order to isolate the master cylinder. To have a better access, it is possible to remove the air cleaner cover. Next, remove the brake tube by removing it off the valve and screw the valve off the master cylinder.