How to Properly Install a Brake Caliper on 2009 Dodge Caliber?

Before installing the rear brake caliper, retract the caliper piston into the cushion with a C-clamp and also place a piece of wood over the piston for extra protection. Slide the outboard brake pad onto the caliper so that the retaining clip is lying at the corners of the depressed part of the caliper, above the raised edge. Put the caliper back onto the disc brake adapter, being careful not to pierce the guide pin boots. As you put the caliper guide pin bolts in place, be sure to line them up where they were before-however, the special sleeve may have a different location if the vehicle was built later. Line up the holes where the caliper guide pin bolts go with the adapter bracket, then tighten both upper and lower bolt bolts to 43 Nm (32 ft. lbs.). Press the hose into the brake caliper and tighten the fitting until it has 15 Nm (133 in. lbs.) of force. Pass the brake flex hose into the trailing link mounted bracket and clip it in place. Twist the brake tube nut on tight to the brake flex hose and make sure the torque is 17 Nm (150 in. lbs.). Create the tire and wheel assembly, tighten the wheel mounting nuts to 135 Nm (100 ft. lbs.) and then lower the car and take out the brake pedal holding tool. As needed, release the caliper's bleed-off valve and also make several stops on the road to clean away any objects on the brakes and make sure the brake shoes are in place.

OEM 2009 Dodge Caliber Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Calipers found

View related parts
2009 Dodge Caliber Caliper, Rear Passenger Side Part Number: 5191268AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 4.30 Pounds
- Item Dimensions: 9.5 x 7.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191268AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Caliper, Front Driver Side Part Number: 5191239AA
$113.04 MSRP: $171.00
You Save: $57.96 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Driver Side
- Item Weight: 8.00 Pounds
- Item Dimensions: 9.5 x 7.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191239AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Caliper, Rear Driver Side Part Number: 68020261AB
$125.07 MSRP: $188.00
You Save: $62.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.2 x 7.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020261AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Caliper, Rear Driver Side Part Number: 5191267AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.00 Pounds
- Item Dimensions: 10.1 x 7.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191267AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Caliper, Front Passenger Side Part Number: 5191238AA
$130.02 MSRP: $181.00
You Save: $50.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 8.10 Pounds
- Item Dimensions: 9.3 x 7.4 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191238AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Caliper, Rear Passenger Side Part Number: 68020252AB
$108.84 MSRP: $145.00
You Save: $36.16 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Passenger Side
- Replaces: 68020252AA
- Item Weight: 4.10 Pounds
- Item Dimensions: 10.3 x 7.4 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020252AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Caliper Part Number: 68033077AA
Product Specifications
- Other Name: Caliper - Disc Brake; Brake Caliper; Caliper Assembly Disc Brake Rear
- Item Weight: 4.50 Pounds
- Item Dimensions: 10.0 x 7.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033077AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Caliper Part Number: 68033076AA
Product Specifications
- Other Name: Caliper - Disc Brake; Brake Caliper; Caliper Assembly Disc Brake Rear
- Item Weight: 4.70 Pounds
- Item Dimensions: 10.3 x 7.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033076AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Caliper, Front Driver Side Part Number: 68032699AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Driver Side
- Item Weight: 6.50 Pounds
- Item Dimensions: 10.7 x 7.9 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68032699AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Dodge Caliber Caliper, Front Passenger Side Part Number: 68032698AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 6.60 Pounds
- Item Dimensions: 10.5 x 7.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68032698AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Dodge Caliber Brake Caliper Parts and Q&A

Q: How to Properly Install a Brake Caliper on 2009 Dodge Caliber?
A: Before installing the rear brake caliper, retract the caliper piston into the cushion with a C-clamp and also place a piece of wood over the piston for extra protection. Slide the outboard brake pad onto the caliper so that the retaining clip is lying at the corners of the depressed part of the caliper, above the raised edge. Put the caliper back onto the disc brake adapter, being careful not to pierce the guide pin boots. As you put the caliper guide pin bolts in place, be sure to line them up where they were before-however, the special sleeve may have a different location if the vehicle was built later. Line up the holes where the caliper guide pin bolts go with the adapter bracket, then tighten both upper and lower bolt bolts to 43 Nm (32 ft. lbs.). Press the hose into the brake caliper and tighten the fitting until it has 15 Nm (133 in. lbs.) of force. Pass the brake flex hose into the trailing link mounted bracket and clip it in place. Twist the brake tube nut on tight to the brake flex hose and make sure the torque is 17 Nm (150 in. lbs.). Create the tire and wheel assembly, tighten the wheel mounting nuts to 135 Nm (100 ft. lbs.) and then lower the car and take out the brake pedal holding tool. As needed, release the caliper's bleed-off valve and also make several stops on the road to clean away any objects on the brakes and make sure the brake shoes are in place.