How to install a Brake Proportioning Valve on 2008 Dodge Caliber?

Then to install the brake proportioning valve it will be positioned in its master cylinder port and tightened to 30 Nm (22 ft. lbs.). Connect the appropriate brake tube to the proportioning valve and tighten the tube nut to 17 Nm (150 in. lbs.) next. Then after, remove the brake pedal holder and bleed the brake line(s) affected. Finally, a road test should be done in order to ensure the brakes are functioning properly.

OEM 2008 Dodge Caliber Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Proportioning Valves found

View related parts
2008 Dodge Caliber Valve Part Number: 5175703AA
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve Proportioning
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.3 x 0.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175703AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Dodge Caliber Valve Part Number: 5175702AA
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve Proportioning
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.4 x 0.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175702AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Dodge Caliber Brake Proportioning Valve Parts and Q&A

Q: How to install a Brake Proportioning Valve on 2008 Dodge Caliber?
A: Then to install the brake proportioning valve it will be positioned in its master cylinder port and tightened to 30 Nm (22 ft. lbs.). Connect the appropriate brake tube to the proportioning valve and tighten the tube nut to 17 Nm (150 in. lbs.) next. Then after, remove the brake pedal holder and bleed the brake line(s) affected. Finally, a road test should be done in order to ensure the brakes are functioning properly.