How to Remove Front and Rear Wheel Studs on 2009 Dodge Dakota?

The first step to removing studs is to raise the vehicle, next remove the wheel and tire. After that, remove the brake caliper, caliper adapter and rotor from the unit. Remove the wheel speed sensor from the hub after that and use tool C-4150A to press the stud in the hub. For the studs of the rear wheels, take off the wheel and tire assembly, remove the brake drum and press the stud off using your special C-4150A tool.

OEM 2009 Dodge Dakota Wheel Stud

Rim Wheel Stud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Stud found

View related parts
2009 Dodge Dakota Wheel Stud, Front Part Number: 5114200AA
Product Specifications
- Other Name: Stud - Hub; Wheel Lug Stud, Front; Wheel Bolt; Stud Hub 9/16-18; Stud Hub; Wheel Lug Stud
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.0 x 0.8 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5114200AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2009 Dodge Dakota Wheel Stud Parts and Q&A

Q: How to Remove Front and Rear Wheel Studs on 2009 Dodge Dakota?
A: The first step to removing studs is to raise the vehicle, next remove the wheel and tire. After that, remove the brake caliper, caliper adapter and rotor from the unit. Remove the wheel speed sensor from the hub after that and use tool C-4150A to press the stud in the hub. For the studs of the rear wheels, take off the wheel and tire assembly, remove the brake drum and press the stud off using your special C-4150A tool.