How to Service the Air Bag Sensor for Front Impact on 2009 Dodge Durango?

Service the front impact sensor by first unplugging the negative battery cable to disable the SRS and allow two minutes for the system's capacitors to become safe. Vehicles using the Hybrid Electric Vehicle system should be checked by a trained technician who disconnects the high voltage service from the battery. Don't strike or drop the sensor at the front, as it can affect the air bag system or its calibration; if it falls, the sensor must be replaced. The first thing to do is remove the screw holding the front impact sensor to the vertical member of the radiator support. After that, remove the headlamp and dash wire harness connector from the sensor connector receptacle and pull out the front impact sensor from the engine compartment.

OEM 2009 Dodge Durango Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

View related parts
2009 Dodge Durango Air Bag Sensor, Front Part Number: 4896061AB
$75.57 MSRP: $112.00
You Save: $36.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact
- Position: Front
- Replaces: 4672311AA, 52851601AB, 4896061AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.2 x 1.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Durango Impact Sensor, Outer Part Number: 4896065AB
$194.09 MSRP: $274.00
You Save: $79.91 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor Impact
- Position: Outer
- Replaces: 4896065AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896065AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Dodge Durango Air Bag Sensor Parts and Q&A

Q: How to Service the Air Bag Sensor for Front Impact on 2009 Dodge Durango?
A: Service the front impact sensor by first unplugging the negative battery cable to disable the SRS and allow two minutes for the system's capacitors to become safe. Vehicles using the Hybrid Electric Vehicle system should be checked by a trained technician who disconnects the high voltage service from the battery. Don't strike or drop the sensor at the front, as it can affect the air bag system or its calibration; if it falls, the sensor must be replaced. The first thing to do is remove the screw holding the front impact sensor to the vertical member of the radiator support. After that, remove the headlamp and dash wire harness connector from the sensor connector receptacle and pull out the front impact sensor from the engine compartment.