Other Name: Valve - Exhaust; Intake Valve; Valves; Valve Exhaust Standard
Item Weight: 0.60 Pounds
Item Dimensions: 5.2 x 1.8 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 53021644AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
SLT, ST, SXT, TRX, TRX4 | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
2009 Dodge Ram 1500 Exhaust Valve Parts and Q&A
Q: How to Remove and Replace Exhaust Valve and Intake Valves on 2009 Dodge Ram 1500?
A: Before you start changing the valves, take out and separate the negative battery cable. Following this, open up the cylinder head covers and take away both the rocker arms and lash adjusters. Now, remove the camshaft front bearing caps and the camshaft and next remove the cylinder head(s). To compress the valve spring, use Valve Spring Compressor C-3422-D or C-3422-C together with Adapter 8519, tapping the top of the valve spring if required to unlock the retainer locks. With the valve spring compressor still on, remove the halves of the retainer lock. As soon as the compressor is released, remove the lock and then the compressor, spring retainer and spring as well. Look for any sharp spots inside the keeper and take out any bumps from the valve stem before you get the valve off the cylinder head. Since intake and exhaust valve seals are identical, take off the seal and label the valve to help installation. Whenever you take out the valves, inspect the valve springs and use a proper test gauge to check that the open and closed spring force and height are what is specified. Replace all springs that fail to obey the standard requirements.