How to Install a Front Sway Bar Link on 2009 Dodge Viper?

Begin by placing the sway bar link (4) into the lower control arm's (3) mounting hole and finishing by installing nut (2) and tightening it to 23 Nm (17 ft. lbs.). After that, place the end of the sway bar onto the sway bar link and tie it in place with nut (1), ensuring it is held firmly with a torque value of 23 Nm (17 ft. lbs.). After that, fit the wheel and tire onto the car, tightening the nuts on the wheel mounts in proper sequence, each to 135 Nm (100 ft. lbs.), one at a time. Adjust the vehicle so that it rests five or six inches above ground.

OEM 2009 Dodge Viper Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2009 Dodge Viper Stabilizer Link, Rear Part Number: 68231479AA
$192.90 MSRP: $291.00
You Save: $98.10 (34%)
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Suspension Stabilizer Bar Link, Rear; Sway Bar Link; Link; Link Kit Stabilizer Bar
- Position: Rear
- Replaces: 4709289, 4709289AB
- Item Weight: 33.60 Pounds
- Item Dimensions: 12.4 x 6.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68231479AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- ACR, Base, GT, GT2, GTC, GTS, R/T-10, SRT, SRT-10, SRT-10 ACR | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
2009 Dodge Viper Stabilizer Link, Front Part Number: 68231477AA
$241.04 MSRP: $335.00
You Save: $93.96 (29%)
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Front Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link; Link Kit Stabilizer Bar; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Replaces: 4763147, 4763147AB
- Item Weight: 1.50 Pounds
- Item Dimensions: 14.1 x 5.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68231477AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- ACR, Base, GT, GT2, GTC, GTS, R/T-10, SRT, SRT-10, SRT-10 ACR | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.4L V10

2009 Dodge Viper Sway Bar Link Parts and Q&A

Q: How to Install a Front Sway Bar Link on 2009 Dodge Viper?
A: Begin by placing the sway bar link (4) into the lower control arm's (3) mounting hole and finishing by installing nut (2) and tightening it to 23 Nm (17 ft. lbs.). After that, place the end of the sway bar onto the sway bar link and tie it in place with nut (1), ensuring it is held firmly with a torque value of 23 Nm (17 ft. lbs.). After that, fit the wheel and tire onto the car, tightening the nuts on the wheel mounts in proper sequence, each to 135 Nm (100 ft. lbs.), one at a time. Adjust the vehicle so that it rests five or six inches above ground.