How to Detach the Antenna Module Assembly for Remote Start on 2009 Jeep Commander?

First, keep the Remote Start Antenna Module Assembly in place and cut off the negative cable from the battery before working on it. Behind and to the left of the cover for the glove box is where you can find the control module, with its connector linking to the WIN on the ignition switch near your right hand. You need to start by uninstalling the glovebox and radio to reach the coax cable tie wraps. To remove both bezel covers, you should use a plastic trim removal stick, since they snap on. After that, open the silencer pad with two screws and then get rid of the knee blocker. Unscrew the two screws at the front of the ignition switch and one screw at the top, then turn the ignition switch assembly to get to the module's electrical connector. Unplug the coax connector from the WIN and loosen the tabs while sliding the module away from the locating pins on the I.P. Take care to cut the coax cable ties where they are marked and pull the coax cable through from the outside through the I.P. holes.

OEM 2009 Jeep Commander Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Antennas found

View related parts
2009 Jeep Commander Satellite Ant Part Number: 5064724AA
$91.60 MSRP: $149.00
You Save: $57.40 (39%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Antenna - Satellite; Satellite Radio Antenna; Radio Antenna Assembly; GPS Antenna Assembly; Radio Antenna Mast; Antenna; Antenna Satellite
- Replaces: 5091504AB, 5150048AA, 5150048AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.2 x 6.8 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064724AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Antenna Mast, Black Part Number: 56038725AC
$26.33 MSRP: $40.05
You Save: $13.72 (35%)
ADD TO CART
Product Specifications
- Other Name: Mast - Antenna; Radio Antenna Mast; Mast; Mast Antenna - Fixed; Mast Antenna
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.6 x 6.4 x 37.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56038725AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Antenna Part Number: 5026444AA
$15.08 MSRP: $23.90
You Save: $8.82 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Antenna - Passive Entry; Antenna Keyless Entry; Antenna Passive Entry
- Replaces: 68143496AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.8 x 3.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5026444AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Antenna Part Number: 5064470AB
$33.27 MSRP: $42.20
You Save: $8.93 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Antenna - Global Positioning; Antenna Global Positioning
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064470AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Antenna Part Number: 5026234AA
Product Specifications
- Other Name: Antenna - Keyless Entry; Antenna Keyless Entry
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.6 x 1.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5026234AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Antenna Base Part Number: 56038790AD
Product Specifications
- Other Name: Base - Antenna; Radio Antenna Base; Base; Base Antenna Base And Cable; Base Antenna
- Item Weight: 0.80 Pounds
- Item Dimensions: 1.6 x 6.2 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56038790AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Antenna Parts and Q&A

Q: How to Detach the Antenna Module Assembly for Remote Start on 2009 Jeep Commander?
A: First, keep the Remote Start Antenna Module Assembly in place and cut off the negative cable from the battery before working on it. Behind and to the left of the cover for the glove box is where you can find the control module, with its connector linking to the WIN on the ignition switch near your right hand. You need to start by uninstalling the glovebox and radio to reach the coax cable tie wraps. To remove both bezel covers, you should use a plastic trim removal stick, since they snap on. After that, open the silencer pad with two screws and then get rid of the knee blocker. Unscrew the two screws at the front of the ignition switch and one screw at the top, then turn the ignition switch assembly to get to the module's electrical connector. Unplug the coax connector from the WIN and loosen the tabs while sliding the module away from the locating pins on the I.P. Take care to cut the coax cable ties where they are marked and pull the coax cable through from the outside through the I.P. holes.