Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Jeep Commander Seat Heater

Seat Warmer
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

  • 2009 Jeep Commander Seat Heater - 5183711AA
    2009 Jeep Commander Seat Heater - 5183711AA
    2009 Jeep Commander Seat Heater - 5183711AA
    2009 Jeep Commander Seat Heater - 5183711AA
    2009 Jeep Commander Seat Heater Diagram - 5183711AA
    View related parts

    2009 Jeep Commander Seat Cushion Heater Part Number: 5183711AA

    Product Specifications
    • Other Name: Pad - Heater; Seat Heater Pad; Element; Pad Heater Cushion; Seat Heater
    • Item Weight: 0.80 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5183711AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2009 Jeep Commander Submodels:
    • Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
  • 2009 Jeep Commander Seat Heater - 5000022AB
    2009 Jeep Commander Seat Heater Diagram - 5000022AB
    View related parts

    2009 Jeep Commander Seat Back Pad, Front Part Number: 5000022AB

    Product Specifications
    • Other Name: Pad - Seat Back; Seat Heater Pad, Front, Front Upper; Seat Back Heater; Heated Pad for back cushion.
    • Position: Front
    • Replaces: 5000022AA
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 6.4 x 6.3 x 10.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5000022AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Jeep Commander Submodels:
    • 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Seat Heater Parts and Q&A

  • Q: How to Safely Install a Replacement Seat Heater on 2009 Jeep Commander?
    A: When putting in the new heating element, avoid folding or creasing the assembly, because this can cause it to fail early. The factory installed element should be taken away and discarded properly. Take off the adhesive backing at the back of the replacement heating element (2) and place it in the location where the factory placed the heating element (1). After that, wire up the new heating element's electrical parts (3 and 4) and attach the negative terminal of the battery. Subsequent to turning on the heated seat system, see if it actually works. Place the seat cushion in the correct way and make sure that the wire harness for the seat is properly routed through the seat and seat back. Also, make sure the excess wire is tucked safely between the cushion's foam and the trim's rear carpet flap.

Related 2009 Jeep Commander Parts

Alternate Year Models

+
2008 Jeep Commander Seat Heater 2010 Jeep Commander Seat Heater