How to Install a Speed Sensor and Its Related Components on 2009 Jeep Commander?

Begin by attaching again the wheel speed sensor wire connector to the vehicle's connector. After that, connect the wire from the wheel speed sensor to the routing clips. Fasten the wheel speed sensor inside the hub, using the mounting bolt and tighten the nut to a range of 12-14 Nm (106-124 in. lbs.). Secure the sensor wire in such a way as to keep it from coming into contact with any chassis pieces and to prevent twisting or bending. Start by fitting the rotor, then overlay the caliper adaptor over top of the rotor. Use a torque wrench to tighten the caliper adaptor bolts between 90 and 115 Nm (66 and 85 ft. lbs.). In the end, fit the tire and wheel combination, remove the support and bring down the vehicle.

OEM 2009 Jeep Commander Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Speed Sensors found

View related parts
2009 Jeep Commander Vehicle Speed Sensor Part Number: 4799061AB
$42.22 MSRP: $60.70
You Save: $18.48 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Input Speed; Automatic Transmission Speed Sensor; Speedometer Sensor; Used for input and output in transmission speed sensing.
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4799061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander ABS Sensor, Front Passenger Side Part Number: 56044144AF
$79.20 MSRP: $119.00
You Save: $39.80 (34%)
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; ABS Wheel Speed Sensor, Front Left/Right; Anti-Lock Braking System.; Front Speed Sensor
- Position: Front Passenger Side
- Replaces: 56044144AD, 56044144AB, 56044144AC
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.9 x 6.7 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56044144AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander ABS Sensor, Rear Passenger Side Part Number: 56044146AB
$93.25 MSRP: $138.00
You Save: $44.75 (33%)
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Rear, Rear Left, Rear Right; Anti-Lock Braking System Speed Sensor; Speed Sensor; Rear Speed Sensor; Sensor Wheel Speed; ABS Wheel Speed Sensor
- Position: Rear Passenger Side
- Replaces: 56044146AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.7 x 5.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 56044146AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Speed Sensor Parts and Q&A

Q: How to Install a Speed Sensor and Its Related Components on 2009 Jeep Commander?
A: Begin by attaching again the wheel speed sensor wire connector to the vehicle's connector. After that, connect the wire from the wheel speed sensor to the routing clips. Fasten the wheel speed sensor inside the hub, using the mounting bolt and tighten the nut to a range of 12-14 Nm (106-124 in. lbs.). Secure the sensor wire in such a way as to keep it from coming into contact with any chassis pieces and to prevent twisting or bending. Start by fitting the rotor, then overlay the caliper adaptor over top of the rotor. Use a torque wrench to tighten the caliper adaptor bolts between 90 and 115 Nm (66 and 85 ft. lbs.). In the end, fit the tire and wheel combination, remove the support and bring down the vehicle.