How to Install a Yaw Sensor on 2009 Jeep Commander?

Put the dynamics sensor securely onto the vehicle. After that, connect the electrical connector to the battery terminal. After doing this, hold the sensor firmly in place and tighten the two retaining nuts to 9 Nm (80 in. lbs.). Installing the floor console comes last.

OEM 2009 Jeep Commander Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2009 Jeep Commander Yaw Rate Sensor Part Number: 56029483AA
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Lateral Accelerometer Sensor; Electronic Stability Module.
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 4.0 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029483AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Yaw Sensor Parts and Q&A

Q: How to Install a Yaw Sensor on 2009 Jeep Commander?
A: Put the dynamics sensor securely onto the vehicle. After that, connect the electrical connector to the battery terminal. After doing this, hold the sensor firmly in place and tighten the two retaining nuts to 9 Nm (80 in. lbs.). Installing the floor console comes last.