How to Remove and Replace Rear Brake Pads on 2009 Jeep Commander?

First, lift the car and hold it up with a jack and then remove the rear wheel and tire. Working carefully, remove a little brake fluid from the reservoir by sucking it out with a clean suction gun. Pry the caliper over the pistons, remove the four slide pins and lift the caliper (1) off its mounting anchor. Place the caliper (1) on a bolt holding the suspension with a wire, so that the brake hose is not carrying the weight. Afterward, take out the inboard and outboard brake pads from the caliper.

OEM 2009 Jeep Commander Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Pads found

View related parts
2009 Jeep Commander Brake Pads, Front Part Number: 5080868AC
$102.42 MSRP: $251.00
You Save: $148.58 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Replaced by: 5080868AD
- Replaces: 5080868AA
- Item Weight: 5.30 Pounds
- Item Dimensions: 10.1 x 5.7 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5080868AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Pad Kit - Front Disc Brake Part Number: 5080868AD
$102.42 MSRP: $251.00
You Save: $148.58 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: FRONT DISC BRAKE
- Position: Front
- Item Weight: 5.50 Pounds
- Item Dimensions: 10.0 x 5.9 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5080868AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Brake Pad Parts and Q&A

Q: How to Remove and Replace Rear Brake Pads on 2009 Jeep Commander?
A: First, lift the car and hold it up with a jack and then remove the rear wheel and tire. Working carefully, remove a little brake fluid from the reservoir by sucking it out with a clean suction gun. Pry the caliper over the pistons, remove the four slide pins and lift the caliper (1) off its mounting anchor. Place the caliper (1) on a bolt holding the suspension with a wire, so that the brake hose is not carrying the weight. Afterward, take out the inboard and outboard brake pads from the caliper.