How to Remove the Front Crankshaft Seal on 2009 Jeep Wrangler?

Disconnect the negative cable from the battery and then take off the accessory drive belt to remove the front crankshaft seal. After that, remove the crankshaft damper. Put Special Tool 6341A on the crankshaft nose, screw in the tool as far as it will go without damage to the seal inside the cover and check that it is in place. To finish, rotate the forcing screw until the seal becomes free from the cover.

OEM 2009 Jeep Wrangler Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2009 Jeep Wrangler Oil Seal, Front Part Number: 4792317AB
$18.27 MSRP: $26.25
You Save: $7.98 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.
- Position: Front
- Replaces: 4792317, 4273275
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.6 x 1.9 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS
View related parts
2009 Jeep Wrangler Rear Main Seal Retainer Part Number: 68031388AA
$103.73 MSRP: $156.00
You Save: $52.27 (34%)
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil; Retainer And Seal Crankshaft Rear Oil
- Position: Rear
- Item Weight: 1.00 Pounds
- Item Dimensions: 1.3 x 10.3 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68031388AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS

2009 Jeep Wrangler Crankshaft Seal Parts and Q&A

Q: How to Remove the Front Crankshaft Seal on 2009 Jeep Wrangler?
A: Disconnect the negative cable from the battery and then take off the accessory drive belt to remove the front crankshaft seal. After that, remove the crankshaft damper. Put Special Tool 6341A on the crankshaft nose, screw in the tool as far as it will go without damage to the seal inside the cover and check that it is in place. To finish, rotate the forcing screw until the seal becomes free from the cover.