How to Install a MAP Sensor on 2010 Chrysler Town & Country?

Make sure to find the location on the intake manifold where a tab prevents a wrong installation before installing the MAP sensor. Place the sensor by screwdriver over it to make sure it touches the tab, then secure the MAP sensor (1) to the intake manifold (3) by turning it a quarter turn clockwise. After that, attach the electrical connector (2) to the sensor (1). After that, attach the negative battery cable and tighten it to 5 Nm (45 in. lbs.).

OEM 2010 Chrysler Town & Country MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2010 Chrysler Town & Country M.A.P. Sensor Part Number: 68199324AB
$61.94 MSRP: $84.25
You Save: $22.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 5033310AC, 68199324AA, 5149091AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68199324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Chrysler Town & Country Submodels:
- LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2010 Chrysler Town & Country MAP Sensor Parts and Q&A

Q: How to Install a MAP Sensor on 2010 Chrysler Town & Country?
A: Make sure to find the location on the intake manifold where a tab prevents a wrong installation before installing the MAP sensor. Place the sensor by screwdriver over it to make sure it touches the tab, then secure the MAP sensor (1) to the intake manifold (3) by turning it a quarter turn clockwise. After that, attach the electrical connector (2) to the sensor (1). After that, attach the negative battery cable and tighten it to 5 Nm (45 in. lbs.).