How to Remove a Blower Motor on 2010 Jeep Liberty?

You should first disconnect the negative battery cable before removing the blower motor. If there is a silencer on the vehicle, pull it out from below the passenger side of the instrument cluster. After that, reach beneath the instrument panel and unplug the wire harness connector (3) from the blower motor (4). Finally, release the blower motor by opening the three screws (2) holding it to the housing (1).

OEM 2010 Jeep Liberty Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motors found

View related parts
2010 Jeep Liberty Blower Motor Part Number: 68038826AB
$179.68 MSRP: $270.00
You Save: $90.32 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor; Blower Assembly; Motor Blower With Wheel
- Replaces: 68038826AA
- Item Weight: 4.40 Pounds
- Item Dimensions: 10.7 x 10.5 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68038826AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2010 Jeep Liberty Blower Motor Part Number: 68038827AA
Product Specifications
- Other Name: Motor - Blower With Wheel
- Item Weight: 4.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68038827AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2010 Jeep Liberty Submodels:
- Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

2010 Jeep Liberty Blower Motor Parts and Q&A

Q: How to Remove a Blower Motor on 2010 Jeep Liberty?
A: You should first disconnect the negative battery cable before removing the blower motor. If there is a silencer on the vehicle, pull it out from below the passenger side of the instrument cluster. After that, reach beneath the instrument panel and unplug the wire harness connector (3) from the blower motor (4). Finally, release the blower motor by opening the three screws (2) holding it to the housing (1).