How to Install a Harmonic Balancer on Chrysler Aspen?

It's important to clean the harmonic balancer bore and crankshaft nose to prevent damage while installing the harmonic balancer. Place the crankshaft key into the harmonic balancer slot and move the harmonic balancer a little up the crankshaft. Attach Special Tool 8512-A by fitting the nut (2) onto the shaft first, adding the roller bearing (1) on the threaded rod so its hardened surface faces the nut (2) and inserting the hardened washer (5) onto the rod. Before installing, add Mopar (R) Nickel Anti-Seize or a similar product to the threads of the threaded rod. Fit Special Tool 8512-A into the harmonic balancer's hole and press the harmonic balancer onto the crankshaft. Tighten the crankshaft harmonic balancer bolt to 175 Nm (130 ft. lbs.), next set up the cooling fan assembly and then attach the radiator upper shroud using 11 Nm (95 in. lbs.) tightness for the bolts. Attach the shroud fan cable, fit the top hose for the radiator and put in the accessory drive belt. Fully fill the coolant and link the short negative connection on the car battery.

How to Remove a Harmonic Balancer from the Crankshaft Pulley on Chrysler Aspen?

Connection with the battery's negative wire should be disconnected before you attempt to remove either the harmonic balancer or crankshaft pulley. After that, take out the accessory drive belt and empty the coolant from the engine. If frained coolant, take out the upper radiator hose and remove the upper fan shroud next. Take off the fan and viscous assembly using Special Tool 6958 Spanner with Adapter Pins 8346, after you have loosened them from the water pump. Detach the electrical connector from the fan where it is mounted inside the radiator shroud, since the transmission cooler line connects to the lower right-hand corner of the shroud. After that, take out the harmonic balancer bolt and finish the job by using Special Tools 8513 Insert and 1026 Three Jaw Puller to remove the balancer.

OEM Chrysler Aspen Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Harmonic Balancers found

View related parts
Chrysler Aspen Vibration Damper Part Number: 53022083AA
$397.32 MSRP: $583.00
You Save: $185.68 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft; Damper Vibration
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Vibration Damper Part Number: 53022162AA
$504.17 MSRP: $739.00
You Save: $234.83 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Vibration Damper Part Number: 53021303AA
Product Specifications
- Other Name: Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Aspen | Limited | 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Vibration Damper Part Number: 53020689AB
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Vibration Damper Part Number: 53021303AD
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft
- Replaces: 53021303BA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 5.7L V8, 8 Cyl 5.7 L GAS

Chrysler Aspen Harmonic Balancer

Choose OEM Harmonic Balancer that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Harmonic Balancer follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Aspen Harmonic Balancer plays a very important role that increasing the reliability and performance of Chrysler Aspen automobiles. As a harmonic balancer helping smooth the vibration of an engine and produced by shaking created by the combustion process, this product is also designed to balance the engine. Chrysler Aspen has applied different types of harmonic balancer designs and models, which include the traditional, viscous fluid type as well as the modified kind with respect to the tuned engine. This assumption is supported by the versatility of the harmonic balancer, which shows how its presence helps keep an engine both efficient and safe, especially as the revolutions per minute increase. Indeed, the Chrysler Aspen is shielded with additional protection, including metal hub and flexible rubber ring the twister, which actually corresponds to rotary motion of the crankshaft, and it is needed for the stable work. It is found to be compatible with many different Aspen models: the regular 4.7L V8 and the more powerful 5.7L Hemi V8; all these additional uses underscore the importance of the harmonic balancer. For instance, the Chrysler Aspen HEV hybrid model of the car depicts the versatility of the harmonic balancer in achieving efficiency in the power train while keeping the car's performance at optimum levels. Being a part of the Chrysler Aspen car, the Chrysler Aspen Harmonic Balancer has been tested and tried to establish itself in the autos market, proved to be reliable enough to enhance the efficiency of the Chrysler car along with making the safety of the cars intact with the help of the harmony balancer; so, the Chrysler Aspen Harmonic Balancer is the must need part for the Chrysler Aspen car owners.

Chrysler Aspen Harmonic Balancer Parts and Q&A

Vibration Damper
53020689AB
Q: How to Install a Harmonic Balancer on Chrysler Aspen?
A:
It's important to clean the harmonic balancer bore and Crankshaft nose to prevent damage while installing the harmonic balancer. Place the crankshaft key into the harmonic balancer slot and move the harmonic balancer a little up the crankshaft. Attach Special Tool 8512-A by fitting the nut (2) onto the shaft first, adding the roller bearing (1) on the threaded rod so its hardened surface faces the nut (2) and inserting the hardened washer (5) onto the rod. Before installing, add Mopar (R) Nickel Anti-Seize or a similar product to the threads of the threaded rod. Fit Special Tool 8512-A into the harmonic balancer's hole and press the harmonic balancer onto the crankshaft. Tighten the crankshaft harmonic balancer bolt to 175 Nm (130 ft. lbs.), next set up the cooling fan assembly and then attach the radiator upper shroud using 11 Nm (95 in. lbs.) tightness for the bolts. Attach the shroud fan cable, fit the top hose for the radiator and put in the accessory Drive Belt. Fully fill the coolant and link the short negative connection on the car battery.
Vibration Damper
53022162AA
Q: How to Remove a Harmonic Balancer from the Crankshaft Pulley on Chrysler Aspen?
A:
Connection with the battery's negative wire should be disconnected before you attempt to remove either the harmonic balancer or crankshaft pulley. After that, take out the accessory Drive Belt and empty the coolant from the engine. If frained coolant, take out the upper radiator hose and remove the upper fan shroud next. Take off the fan and viscous assembly using Special Tool 6958 Spanner with Adapter Pins 8346, after you have loosened them from the Water Pump. Detach the electrical connector from the fan where it is mounted inside the radiator shroud, since the transmission cooler line connects to the lower right-hand corner of the shroud. After that, take out the harmonic balancer bolt and finish the job by using Special Tools 8513 Insert and 1026 Three Jaw Puller to remove the balancer.