How to Install an A/C Clutch on Chrysler Pacifica?

Put the dowel pin on the reverse side of the field coil into the hole at the leading edge of the A/C compressor, then place the field coil onto the compressor without crushing the wire lead. With the bevel to the outside and the eyelets toward the right or left, a new snap ring must hold the compressor clutch field coil in place. Attach the snap ring 9764 or an equivalent, just under the field coil, checking that it is flush in its groove. Be careful not to harm the friction surfaces while fitting the pulley and bearing so you don't cause the clutch to fail too soon. If it seems necessary, use a block of wood to tap the pulley. A new snap ring goes on to fix the pulley and bearing assembly, with its bevel pointing outward. Should you reuse the clutch plate and pulley and bearing set, fit the original shim(s) onto the shaft; using new parts, attach two 2.54 mm shims in a trial stack. Slide the clutch plate over the front of the A/C compressor and connect it using the compressor shaft bolt, but don't tighten it yet. Don't forget to see the gap at various points on the engine pulley prior to turning the final screw; re-check it after spinning the pulley. For clutch plates or blades set in a recess, apply a 90° wire gap gauge, but use a blade type feeler gauge for all others, so the air gap measures 0.35 - 0.60 mm and shims are added where necessary. Guide the compressor clutch field coil wire lead behind the connector bracket and put on the connector. Mount the compressor on the engine and tighten the retaining bolts, connect the wire harness from the engine to the compressor clutch field coil, put on the accessory drive belt and link the negative battery cable again.

OEM Chrysler Pacifica A/C Clutch

Air Conditioning Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 A/C Clutches found

View related parts
Chrysler Pacifica Clutch Coil Part Number: 68257494AA
$256.06 MSRP: $379.00
You Save: $122.94 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - A/C Clutch; A/C Compressor Clutch Coil; Coil A/C Clutch; A/C Compressor Clutch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Pulley Part Number: 68257495AA
$321.77 MSRP: $479.00
You Save: $157.23 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley Kit - A/C Compressor; A/C Compressor Clutch Pulley; Pulley Hub Kit A/C Compressor; A/C Compressor Clutch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Clutch Kit Part Number: 68257493AA
$285.52 MSRP: $425.00
You Save: $139.48 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Package - A/C Compressor; A/C Compressor Clutch; Clutch; Clutch Overhaul Kit A/C Compressor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Pulley Part Number: 5140469AA
$49.81 MSRP: $63.15
You Save: $13.34 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley Kit - A/C Compressor; A/C Compressor Clutch; Pulley Hub Kit A/C Compressor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

Chrysler Pacifica A/C Clutch

Choose OEM A/C Clutch that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each A/C Clutch follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Pacifica A/C Clutch is a key part of the vehicle's air conditioning system considered to be rather effective and efficient. This A/C Clutch is instrumental in converting the engine power to be used in running the A/C compressor, and switches on when the air conditioning is on. Its design is effective in reducing pressure in the engine through disengagement whenever it is not in use; making it more efficient and safe. Chrysler Pacifica A/C Clutch's design allows users to control their pacifica car climate adequately since no matter the version of the pacifica, this component keeps the clients happy. Common problems include sticking or slipping A/C clutch that affects the performance of the air conditioner and car fuel efficiency, Chrysler has later upgrades the A/C Clutch to improve their designs. All these are in an effort to prevent any resultant damage to the compressor; a show of concern in detail that is in line with Chrysler's motto of quality production. Other features of Chrysler Pacific A/C Clutch include the fact that it is heavily built, and it has the optimal magnetization ever that makes it work well in any environment that is being tested. Thus, the Chrysler Pacifica A/C Clutch is notable in the automotive market striving for saving vehicles' owners' peace of mind when searching for comfort and reliable car. Thus, the Chrysler Pacifica A/C Clutch is an important component that, based on experience, increases comfort when driving and is valued by families and others.

Chrysler Pacifica A/C Clutch Parts and Q&A

Pulley
5140469AA
Q: How to Install an A/C Clutch on Chrysler Pacifica?
A:
Put the dowel pin on the reverse side of the field coil into the hole at the leading edge of the A/C compressor, then place the field coil onto the compressor without crushing the wire lead. With the bevel to the outside and the eyelets toward the right or left, a new snap ring must hold the compressor clutch field coil in place. Attach the snap ring 9764 or an equivalent, just under the field coil, checking that it is flush in its groove. Be careful not to harm the friction surfaces while fitting the pulley and bearing so you don't cause the clutch to fail too soon. If it seems necessary, use a block of wood to tap the pulley. A new snap ring goes on to fix the pulley and bearing assembly, with its bevel pointing outward. Should you reuse the clutch plate and pulley and bearing set, fit the original shim(s) onto the shaft; using new parts, attach two 2.54 mm shims in a trial stack. Slide the clutch plate over the front of the A/C compressor and connect it using the compressor shaft bolt, but don't tighten it yet. Don't forget to see the gap at various points on the engine pulley prior to turning the final screw; re-check it after spinning the pulley. For clutch plates or blades set in a recess, apply a 90° wire gap gauge, but use a blade type feeler gauge for all others, so the air gap measures 0.35 - 0.60 mm and shims are added where necessary. Guide the compressor clutch field coil wire lead behind the connector bracket and put on the connector. Mount the compressor on the engine and tighten the retaining bolts, connect the wire harness from the engine to the compressor clutch field coil, put on the accessory Drive Belt and link the negative Battery Cable again.