How to Service and Repair a Front Crankshaft Seal on Chrysler Prowler?

You need to start by removing the timing belt to perform any front crankshaft seal work. Then, take Special Tool L-4407-A and remove the crankshaft sprocket. Push dowel pin into the crankshaft, then use a magnet to retrieve it from the hole in the crankshaft damper coupling. Open the crankshaft seal with Special Tool 6341A; be careful not to damage the seal surface on the shaft or the seal bore. It is important to ensure the shaft seal lip surface is free of varnish, dirt or nicks and you should smooth any nicks with 400 grit paper. To install it, you should use Special Tool 6342. Have the dowel pin inserted into the crankshaft so that there is approximately 1.2 mm (0.047 in.) of its protruding part. When installing the crankshaft sprocket, use Special Tool 6641 to achieve the correct installation depth. With Special Tools 6641 and C-4685-C1, you should install the crankshaft sprocket and then replace the timing belt.

OEM Chrysler Prowler Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Seals found

View related parts
Chrysler Prowler Oil Seal, Front Part Number: 4792317AB
$18.27 MSRP: $26.25
You Save: $7.98 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.
- Position: Front
- Replaces: 4792317, 4273275
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Prowler | Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Prowler Rear Main Seal Part Number: 4663625
$32.82 MSRP: $42.24
You Save: $9.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Main Seal Gasket; Seal Rear Main Crankshaft See Note; Seal Rear Main Crankshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Prowler | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler Prowler Rear Main Seal Part Number: 4663870
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal; Crankshaft Seal; Rear Main Seal Retainer; Retainer Crankshaft Rear Oil Seal See Note; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Prowler | Base | 6 Cyl 3.5 L GAS

Chrysler Prowler Crankshaft Seal

Choose OEM Crankshaft Seal that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Crankshaft Seal follows strict manufacturing steps to lock in quality and fit. If your Chrysler Prowler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Prowler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Prowler Crankshaft Seal is a part that makes up the Chrysler Prowler range by drawing attention to the reliability and performance of the Chrysler. This Crankshaft Seal is situated at the forward part of the engine and it functions to address oil leakage issues in the crankcase for proper lubrication of the engine. Chrysler Crankshaft Seal is a metal and rubber build component crucial to Prowler cars as it reduces the level of friction that leads to wear of the other parts in the Prowler models. Over time as the Chrysler Prowler also gets old, something like seepage of oil will indicate that it is high time the Crankshaft Seal was replaced for the smooth running of the vehicle. This proactive maintenance not only increases the performance of the Chrysler Prowler's engine but also for the safety of the vehicle hence making it favorable for enthusiasts. This shows that we have a close relation with the crankshaft seal on its applicability to the various models of the Prowler and thus is critically important to the automotive market. Arguably the most impressive Crankshaft Seal lies in its power and durability in the high performance engines in such a manner that the crankshaft seals efficiently hence the performance of the car. Chrysler crankshaft seal is thus a show of technological advancement, excellent workmanship, and dexterity on the part of Chrysler Company to ensure they were in a position to serve the Prowler with the prime quality seal in the market.

Chrysler Prowler Crankshaft Seal Parts and Q&A

Oil Seal, Front
4792317AB
Q: How to Service and Repair a Front Crankshaft Seal on Chrysler Prowler?
A:
You need to start by removing the Timing Belt to perform any front Crankshaft seal work. Then, take Special Tool L-4407-A and remove the crankshaft sprocket. Push dowel pin into the crankshaft, then use a magnet to retrieve it from the hole in the crankshaft damper coupling. Open the crankshaft seal with Special Tool 6341A; be careful not to damage the seal surface on the shaft or the seal bore. It is important to ensure the shaft seal lip surface is free of varnish, dirt or nicks and you should smooth any nicks with 400 grit paper. To install it, you should use Special Tool 6342. Have the dowel pin inserted into the crankshaft so that there is approximately 1.2 mm (0.047 in.) of its protruding part. When installing the crankshaft sprocket, use Special Tool 6641 to achieve the correct installation depth. With Special Tools 6641 and C-4685-C1, you should install the crankshaft sprocket and then replace the timing belt.