How to Service an Engine Oil Cooler on Chrysler Sebring?

An engine oil cooler should be serviced by putting the vehicle on a hoist and emptying out the cooling system. Subsequently, take off the oil cooler hoses from the coolant hotels, pull off the oil filter with number 3 and remove the oil cooler bolt which has number 2. Removing the oil cooler with part number 1, you should note that oil coolers cannot be cleaned and must be replaced if the engine needs rebuilding or a replacement.

How to Install an Engine Oil Cooler on Chrysler Sebring?

Before installing the engine oil cooler, make sure to change the oil cooler seal. Add lubricant to the seal and slide the oil cooler onto the oil filter adapter, so that the notch matches the tab. Now, put in the oil cooler connector bolt and tighten it until it reaches 49 Nm (36 ft. lbs.). Then, set the oil filter in place and link the oil cooler coolant hose. After that, bring the vehicle back down to earth and add coolant to the system.

OEM Chrysler Sebring Engine Oil Cooler

Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Engine Oil Coolers found

View related parts
Chrysler Sebring Oil Cooler Part Number: 4884757AE
$103.32 MSRP: $155.00
You Save: $51.68 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler - Engine Oil; Engine Oil Cooler; Cooler Engine Oil
- Replaces: 4884757AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Oil Cooler Part Number: 4892377AA
Product Specifications
- Other Name: Cooler - Engine Oil; Engine Oil Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Sebring | Base, LX, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Oil Cooler Part Number: 4892377AB
Product Specifications
- Other Name: Cooler - Engine Oil; Cooler Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | LX, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

Chrysler Sebring Engine Oil Cooler

Choose OEM Engine Oil Cooler that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Engine Oil Cooler follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Engine Oil Cooler Parts and Q&A

Oil Cooler
4884757AE
Q:
How to Service an Engine Oil Cooler on Chrysler Sebring?
A:
An engine oil cooler should be serviced by putting the vehicle on a hoist and emptying out the cooling system. Subsequently, take off the oil cooler hoses from the coolant hotels, pull off the Oil Filter with number 3 and remove the oil cooler bolt which has number 2. Removing the oil cooler with part number 1, you should note that oil coolers cannot be cleaned and must be replaced if the engine needs rebuilding or a replacement.
Oil Cooler
4892377AA
Q:
How to Install an Engine Oil Cooler on Chrysler Sebring?
A:
Before installing the engine oil cooler, make sure to change the oil cooler seal. Add lubricant to the seal and slide the oil cooler onto the Oil Filter adapter, so that the notch matches the tab. Now, put in the oil cooler connector bolt and tighten it until it reaches 49 Nm (36 ft. lbs.). Then, set the oil filter in place and link the oil cooler coolant hose. After that, bring the vehicle back down to earth and add coolant to the system.