How to Install a Blend Door Actuator on Dodge Dakota?

Place the blend door actuator above the HVAC housing so that the actuator shaft is lined up with the blade linkage. Fasten the blend door actuator to the HVAC housing with three screws, set to 2 Nm (17 in. lbs.). Connect the HVAC wire harness connector onto the blend door actuator before putting in the instrument panel. After that, reattach the negative battery cable and use a scan tool to begin the Actuator Calibration function.

How to Service a Blend Door Actuator on Dodge Dakota?

The first thing to do for blend door actuator service is to remove the car's negative battery cable, wait two minutes for the air bag capacitor to empty and then disable the air bag system. Make sure not to harm the front face of the instrument panel while performing the procedure. Take out the instrument panel and unscrew the three bolts holding the blend door actuator to the HVAC housing above. Remove the wire harness connector from the blend door actuator and take out the actuator from the housing. Install the actuator so that the split shaft connectors on the top of the housing are lined up with those on the blend-air door linkage. Attach the supplied actuator to the vehicle with the three supplied screws which should be torqued to 2 N.m (17 in. lbs.) tightness. Remember to hook the secured actuator to the HVAC wire harness connector. Connect the instrument panel, put the negative cable back on the battery and then start the Actuator Calibration procedure using a scan tool.

OEM Dodge Dakota Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Blend Door Actuators found

View related parts
Dodge Dakota Door Actuator Part Number: 68299450AA
$93.38 MSRP: $141.00
You Save: $47.62 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator - A/C And Heater; HVAC Floor Mode Door Actuator; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; Actuator; Actuator A/C And Heater
- Replaces: 68033337AA, 68238243AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
View related parts
Dodge Dakota Actuator, Rear Part Number: 5061099AA
$63.90 MSRP: $94.00
You Save: $30.10 (33%)
Product Specifications
- Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door Actuator, Rear; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator A/C And Heater Serviced With Distribution Housing; Actuator A/C And Heater
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Dakota | Laramie, SLT, ST, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Actuator Part Number: 4462694
Product Specifications
- Other Name: Actuator - Heater; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Actuator, A/C Mode Door Vacuum; Actuator, Heater Mode Door; Actuator, A/C. Mode Door; Actuator Heater
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Actuator Part Number: 5210111
Product Specifications
- Other Name: HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; Actuator, Heater Recirculation & Fresh Air Door; A/C Recirculation Door options available.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Actuator Part Number: 4734716
Product Specifications
- Other Name: Actuator - Heater; HVAC Defrost Mode Door Actuator; HVAC Heater Blend Door Actuator; Actuator Heater
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Actuator Part Number: 5210111AB
Product Specifications
- Other Name: Actuator - Heater; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; Actuator Heater
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

Dodge Dakota Blend Door Actuator

Choose OEM Blend Door Actuator that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Blend Door Actuator follows strict manufacturing steps to lock in quality and fit. If your Dodge Dakota matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Dakota parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A central piece of the Dodge Dakota HVAC system stands the reliable Blend Door Actuator which operates within Dakota vehicles. Through its electrical control the motor manipulates air flow across different vents to position the blend door correctly and efficiently control the ventilation of hot and cold air which makes the cabin reach optimal temperature settings. Various Dodge Dakota models benefit from this Dodge Dakota Blend Door Actuator because of its adaptable design which ensures automotive comfort and operational functionality. The device serves two critical functions because when it malfunctions it causes systems to function improperly leading to dangerous situations on the road. The Dodge Dakota Blend Door Actuator maintains popularity in the automotive market because its strong construction along with reliable functioning minimizes breakdown probability. Installation and maintenance operations of this actuator become effortless because it features user-friendly design. Intended for Dodge automobile owners this actuator covers budgets of all types thus making it a vital performance upgrade for car vehicles. The car Blend Door Actuator stands as a testament to the automaker automotive excellence because it serves as a crucial HVAC component which provides a practical enhancement for the model driving experience.

Dodge Dakota Blend Door Actuator Parts and Q&A

Door Actuator
68299450AA
Q: How to Install a Blend Door Actuator on Dodge Dakota?
A:
Place the blend door actuator above the HVAC housing so that the actuator shaft is lined up with the blade linkage. Fasten the blend door actuator to the HVAC housing with three screws, set to 2 Nm (17 in. lbs.). Connect the HVAC wire harness connector onto the blend door actuator before putting in the instrument panel. After that, reattach the negative Battery Cable and use a scan tool to begin the Actuator Calibration function.
Actuator, Rear
5061099AA
Q: How to Service a Blend Door Actuator on Dodge Dakota?
A:
The first thing to do for blend door actuator service is to remove the car's negative Battery Cable, wait two minutes for the air bag capacitor to empty and then disable the air bag system. Make sure not to harm the front face of the instrument panel while performing the procedure. Take out the instrument panel and unscrew the three bolts holding the blend door actuator to the HVAC housing above. Remove the wire harness connector from the blend door actuator and take out the actuator from the housing. Install the actuator so that the split shaft connectors on the top of the housing are lined up with those on the blend-air door linkage. Attach the supplied actuator to the vehicle with the three supplied screws which should be torqued to 2 N.m (17 in. lbs.) tightness. Remember to hook the secured actuator to the HVAC wire harness connector. Connect the instrument panel, put the negative cable back on the battery and then start the Actuator Calibration procedure using a scan tool.