How to Properly Bleed a Brake Master Cylinder Before Installation on Dodge Dakota?

You should bleed the vehicle before putting the new brake master cylinder in. You will need bleed tubes and a wooden dowel to stroke the pistons, and bleed tubes can be made from brake line. To start, attach the brake master cylinder to a vise. After that, fit bleed tubes onto the outlet ports on the cylinder and insert their other ends into the reservoir. Add brake fluid of good quality to the reservoir. Press both pistons in with the dowel, remove it, and let the pistons bounce back under the spring force. Perform ethanol washes one at a time until the bubbles in the fluid disappear.

How to Remove and Replace a Brake Master Cylinder on Dodge Dakota?

To remove and replace the Brake Master Cylinder the prop rod must be installed on the brake pedal to maintain pressure on the brake system. Then, take off the reservoir cap and pour the fluid into the drain container using siphon. Remove the two reservoir mounting screws and disconnect the electrical connector from the fluid level switch in the reservoir. Then, undo the master cylinder and take the reservoir from it and remove the old seals from the cylinder body.

OEM Dodge Dakota Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Master Cylinders found

View related parts
Dodge Dakota Master Cylinder Part Number: 5175103AA
$138.26 MSRP: $209.00
You Save: $70.74 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Master Cylinder Part Number: 5142652AA
$159.77 MSRP: $202.54
You Save: $42.77 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Dakota | Laramie, SLT, ST, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Master Cylinder Part Number: 5183200AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Master Cylinder Part Number: 4798157
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Master Cylinder Part Number: 5159992AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Dakota | Laramie, SLT, ST, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Reservoir Part Number: 5017424AA
Product Specifications
- Other Name: Master Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Reservoir Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Reservoir Part Number: 4882865
Product Specifications
- Other Name: Master Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Reservoir Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Master Cylinder Part Number: 4897208AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1996 Dodge Dakota | Base, LE, S, SE, SLT, Shelby, Sport, WS | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Master Cylinder Part Number: 5093049AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Dodge Dakota | Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Dakota Brake Master Cylinder

Choose OEM Brake Master Cylinder that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Master Cylinder follows strict manufacturing steps to lock in quality and fit. If your Dodge Dakota matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Dakota parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Brake Master Cylinder used in Dodge Dakota automobiles is an essential part of the braking mechanism to apply hydraulic force to control the brake system's slave cylinders depending on the pressure applied on the brake pedal by the driver. This works through hydraulic system that employs brake fluid, pressure applied to it makes the calipers or drum brakes apply force that leads to the required friction so as to stop the car. Other features of Dodge Dakota models include the use of dual circuit master cylinders whereby if the first circuit is not functional, there is still the second circuit which can offer the braking effort. Some of Dodge Dakota Brake Master Cylinders have internal fluid reservoirs while others have an external reservoir made of nylon or plastic. Thus there are differences in the reservoir design that may impact on the maintenance aspects and possible leakage locations. Among them, the most frequent problems of the Brake Master Cylinder are fluid leakage and internal failure and they can really reduce the braking force and therefore, the driver should promptly get a professional maintenance for the safe driving of the Dodge Dakota.

Dodge Dakota Brake Master Cylinder Parts and Q&A

Master Cylinder
5183200AA
Q: How to Properly Bleed a Brake Master Cylinder Before Installation on Dodge Dakota?
A:
You should bleed the vehicle before putting the new brake master cylinder in. You will need bleed tubes and a wooden dowel to stroke the Pistons, and bleed tubes can be made from Brake Line. To start, attach the brake master cylinder to a vise. After that, fit bleed tubes onto the outlet ports on the cylinder and insert their other ends into the reservoir. Add brake fluid of good quality to the reservoir. Press both pistons in with the dowel, remove it, and let the pistons bounce back under the spring force. Perform ethanol washes one at a time until the bubbles in the fluid disappear.
Master Cylinder
5175103AA
Q: How to Remove and Replace a Brake Master Cylinder on Dodge Dakota?
A:
To remove and replace the Brake Master Cylinder the prop rod must be installed on the brake pedal to maintain pressure on the brake system. Then, take off the reservoir cap and pour the fluid into the drain container using siphon. Remove the two reservoir mounting screws and disconnect the electrical connector from the fluid level switch in the reservoir. Then, undo the master cylinder and take the reservoir from it and remove the old seals from the cylinder body.