How to service and repair the heater control valve on Dodge Ram 1500 Van?

Before servicing or repairing your heater control valve, drain the engine cooling system first. First, remove the vacuum harness from the actuator, take off the heater hoses from the nipples and then remove the front water valve from the engine compartment for the front water valve. For cars with the rear A/C, drain the cooling system, then open the cover on the rear heater-A/C unit. Release the clip keeping the cable housing to the bracket on the water valve, take the control cable out of the rear water valve lever hook, remove the two hoses from the heater-A/C and then pull the water valve out of the back of the heater-A/C unit. In the engine compartment, point the arrow on the front water valve towards the heater core, add and install the heater hoses, plug the harness connector into the engine assembly and finish by filling the engine cooling system. With the rear water valve, fit it to the back heater-A/C unit, attach the heater hoses, hook the control cable end to the clevis near the lever on the valve, push the cable housing into its bracket, install the retaining clip over the housing, replace the cover on the heater-A/C unit and then start filling your engine's cooling system.

How to Service the Heater Control Valve in the Engine Cooling System on Dodge Viper?

Starting any service on the engine requires the water control valve, found between the inlet and outlet heater hoses, to be lower than the level of water in the engine. Release the tension on the hose clamps connecting the water control valve, remove the heater control cable and heater hoses and remember to note where each hose goes for easy reconnection. Take out the mounting bolts from the water valve. When you install the system, take these directions in reverse to ensure that the hoses sit correctly, no more than 1/16 inch from the control valve base. Keeping the hose and nipple for the water control valve free from dirt and always dry is necessary. You should never use oil or silicone during hose installation. You will need new clamps and remember to use the Temperature Control Cable setup method for a good configuration.

OEM Dodge Heater Control Valve

HVAC Heater Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Heater Control Valves found

View related parts
Dodge Water Valve Part Number: 5103807AA
$232.74 MSRP: $295.04
You Save: $62.30 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Water; HVAC Heater Control Valve; Coolant Control Valve; Heater Control Valve; Control Valve; Valve Water
Fits the following Dodge Models:
- Sprinter 2500 | 2003-2006 | Base | 5 Cyl 2.7 L DIESEL
- Sprinter 3500 | 2003-2006 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Valve Part Number: 5103770AA
$481.25 MSRP: $610.07
You Save: $128.82 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Water; HVAC Heater Control Valve; Coolant Control Valve; Valve Water
Fits the following Dodge Models:
- Sprinter 2500 | 2003-2006 | Base | 5 Cyl 2.7 L DIESEL
- Sprinter 3500 | 2003-2006 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Water Valve Part Number: 3849943
$25.56 MSRP: $32.41
You Save: $6.85 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Auxiliary Heater Water Control; Control Valve; Valve; Valve, Auxiliary Heater Water Control
Fits the following Dodge Models:
- Caravan | 1984-1992 | Base, C/V, ES, LE, SE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Grand Caravan | 1987-1992 | Base, ES, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Mini Ram | 1985-1988 | Base, Royal | 4 Cyl 2.2 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Dodge Water Valve Part Number: 4339457
Product Specifications
- Other Name: Valve - A/C And Heater Water; Heater Control Valve; Control Valve; A/C and Heater Water Valves; Various configurations and portions available.
Fits the following Dodge Models:
- 600 | 1984-1985 | Base, ES, SE | 4 Cyl 2.6 L GAS
- Aries | 1984-1985 | Base, Custom, LE, SE | 4 Cyl 2.6 L GAS
- B150 | 1984-1994 | Base | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
- B1500 | 1995-1997 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
- B250 | 1984-1994 | Base | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B2500 | 1995-1997 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B350 | 1984-1994 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B3500 | 1995-1997 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Caravan | 1984-1995 | Base, C/V, ES, LE, SE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- D100 | 1984-1989 | Custom | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View More
View related parts
Dodge Water Valve Part Number: MB380817
Product Specifications
- Other Name: Valve - Heater Water; Heater Control Valve; Control Valve; Valve, Water
Fits the following Dodge Models:
- Ram 50 | 1987-1993 | Base, Custom, LE, SE, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Water Valve Part Number: 55055588
Product Specifications
- Other Name: Valve - Water Control; HVAC Heater Control Valve; Control Valve; Valve Water Control; Heater Control Valve
Fits the following Dodge Models:
- B1500 | 1998 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B2500 | 1998 | Base | 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
- B3500 | 1998 | Base | 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
- Ram 1500 Van | 1999-2003 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Ram 2500 Van | 1999-2003 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
- Ram 3500 Van | 1999-2003 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View More
View related parts
Dodge Control Valve Part Number: 5011241AA
Product Specifications
- Other Name: Valve - A/C And Heater Water; HVAC Heater Control Valve; Valve A/C And Heater Water; Heater Control Valve
Fits the following Dodge Models:
- B1500 | 1998 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B2500 | 1998 | Base | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B3500 | 1998 | Base | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Ram 1500 Van | 1999-2003 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Ram 2500 Van | 1999-2003 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Ram 3500 Van | 1999-2003 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View More
View related parts
Dodge Control Valve Part Number: 4642554
Product Specifications
- Other Name: Valve - Water Control; Heater Control Valve; Heater Valve; Valve Water Control; Valve, Water
Fits the following Dodge Models:
- Viper | 1992-2002 | ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Control Valve Part Number: 4462409
Product Specifications
- Other Name: Valve; Heater Control Valve; Valve, A/C, Heater Water (4 Portion)
Fits the following Dodge Models:
- Daytona | 1987 | Base, Pacifica, Shelby Z | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
- Omni | 1988-1990 | America, Base | 4 Cyl 2.2 L GAS
View related parts
Dodge Control Valve Part Number: 4361017
Product Specifications
- Other Name: Valve Auxiliary Heater Water; Heater Control Valve; Cable, W/Knob, Auxiliary A/C And Heater Temperature Control; Valves for A/C and Heater Water.
Fits the following Dodge Models:
- B150 | 1984-1994 | Base | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
- B1500 | 1995-1997 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
- B250 | 1984-1994 | Base | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B2500 | 1995-1997 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B350 | 1984-1994 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B3500 | 1995-1997 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View More
View related parts
Dodge Control Valve Part Number: 4163906
Product Specifications
- Other Name: Valve Auxiliary Heater Water; Heater Control Valve; Valve, A/C & Heater Auxiliary Water Vacuum On - Off; Heater Water Vacuum (On & Off)
Fits the following Dodge Models:
- B150 | 1984-1994 | Base | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
- B1500 | 1995-1997 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
- B250 | 1984-1994 | Base | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B2500 | 1995-1997 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B350 | 1984-1994 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- B3500 | 1995-1997 | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View More
View related parts
Dodge Control Valve Part Number: 3849321
Product Specifications
- Other Name: Valve - Auxiliary Heater Water (3 Portion); Heater Control Valve; Hose And Valve Assembly, Auxiliary Heat And A/C; Water Valves (2 & 3 Portion) for Heater.
Fits the following Dodge Models:
- Caravan | 1993-1995, 1988 | Base, C/V, ES, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Grand Caravan | 1993-1995, 1988 | Base, ES, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Mini Ram | 1988 | Base | 6 Cyl 3.0 L GAS
View More
View related parts
Dodge Control Valve Part Number: 3849199
Product Specifications
- Other Name: Valve - Heater Water; Heater Control Valve; A/C, Heater, Water (4 Portion) for 2.2L, 2.5L engines.
Fits the following Dodge Models:
- 600 | 1988, 1986 | Base, ES, SE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
- Aries | 1988, 1986 | America, Base, LE, SE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
- Daytona | 1988, 1986 | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
- Dynasty | 1988-1990 | Base, LE | 4 Cyl 2.5 L GAS
- Lancer | 1988, 1986 | Base, ES, Shelby | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
- Shadow | 1988 | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
- Spirit | 1990 | Base, ES, LE | 4 Cyl 2.5 L GAS
View More

Dodge Heater Control Valve

OEM parts sourced directly from Dodge deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Dodge Heater Control Valve for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Dodge Heater Control Valve directs hot coolant quickly to maintain cabin heat constant in any cold weather. Dodge began as a shabby machine shop and soon transformed steel and sweat into muscle on the road. In 1914, Dodge surprised competitors when it produced the first all-steel body and toughness was not a choice. Dodge followed up with brash force with screeching HEMI mills and the extreme Viper that turned the highways into racetracks. Dodge now feeds a 600-watt Fratzonic thunder down its quiet electric lineup allowing drivers to select Drag, Donut, Sport or hush-quiet Stealth. Power encounters showmanship and all products tend to gratify grin-inducing acceleration and undoubted presence in the street. Attitude is as swiftly followed by innovation, with the replacement of pistons by electrons not stifling the spirit of revolt. Heater Control Valve is installed in the coolant line, and it closes or opens swiftly to control the amount of hot water that flows into the heater core to allow the blower to eject a continuous stream of warm air at the time of ice biting the glass. When the Heater Control Valve gets stuck, the smell of coolant, the dancing needles on the temperature, and shivering even with the fan on can be experienced. A new Heater Control Valve prevents leaks and recreates reliable climate control and leaves the engine alone to heat stress due to trapped fluid. The Heater Control Valve has rugged seals and strong housing that bounces off vibration and pressure changes throughout the whole range.

Dodge Heater Control Valve Parts and Q&A

Control Valve
5011241AA
Q: How to service and repair the heater control valve on Dodge Ram 1500 Van?
A:
Before servicing or repairing your heater control valve, drain the engine cooling system first. First, remove the vacuum harness from the actuator, take off the heater hoses from the nipples and then remove the front water valve from the engine compartment for the front water valve. For cars with the rear A/C, drain the cooling system, then open the cover on the rear heater-A/C unit. Release the clip keeping the cable housing to the bracket on the water valve, take the control cable out of the rear water valve lever hook, remove the two hoses from the heater-A/C and then pull the water valve out of the back of the heater-A/C unit. In the engine compartment, point the arrow on the front water valve towards the heater core, add and install the heater hoses, plug the harness connector into the engine assembly and finish by filling the engine cooling system. With the rear water valve, fit it to the back heater-A/C unit, attach the heater hoses, hook the control cable end to the clevis near the lever on the valve, push the cable housing into its bracket, install the retaining clip over the housing, replace the cover on the heater-A/C unit and then start filling your engine's cooling system.
Control Valve
4642554
Q: How to Service the Heater Control Valve in the Engine Cooling System on Dodge Viper?
A:
Starting any service on the engine requires the water control valve, found between the inlet and outlet heater hoses, to be lower than the level of water in the engine. Release the tension on the hose clamps connecting the water control valve, remove the heater control cable and heater hoses and remember to note where each hose goes for easy reconnection. Take out the mounting bolts from the water valve. When you install the system, take these directions in reverse to ensure that the hoses sit correctly, no more than 1/16 inch from the control valve base. Keeping the hose and nipple for the water control valve free from dirt and always dry is necessary. You should never use oil or silicone during hose installation. You will need new clamps and remember to use the Temperature Control Cable setup method for a good configuration.