How to Install a Steering Column Cover for Upper on Dodge Journey?

Press the four upper shroud gap hider retaining tabs inside the four mounting holes of the instrument cluster, then push them upward to hold the upper shroud onto the steering column. Third, use the side retaining tabs of the shroud gap hiders and join them with the side mounting holes. After the column tilt lever is down, put the lower shroud on top of the lever and the column. Latch the upper shroud to the lower one and put in the three screws connecting the lower shroud to the column. Be sure the column tilt is right at the top, position the control lever upward and lastly mount the reinforcement support with the four supplied screws.

How to Remove and Repair a Steering Column Cover for Upper on Dodge Journey?

You should begin by tugging on the lever that raises the steering wheel column to the top. After that, uncover the steering column opening. After that, remove the two steering column cover reinforcement screws and remove the the steering column cover reinforcement. Then, put the column at its lowest angle and leave the tilt lever set to released. When removing lower shrouds, first open the screws and press along both sides at the same location to disconnect them. As soon as you knock off the lower shroud, pull the column all the way out. Lift the shroud gap hider behind where it is blocked and intelligage two side and four upper tabs that hold it to the instrument cluster. Lastly, remove the top cover that goes over the column.

OEM Dodge Journey Steering Column Cover

Steering Column Cover Bezel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Steering Column Covers found

View related parts
Dodge Journey Column Cover Part Number: 1RQ78DX9AB
$86.61 MSRP: $154.00
You Save: $67.39 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Steering Column Opening; Instrument Panel Trim Panel; Cover Steering Column Opening; Cover Steering Column
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Journey | AVP, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Upper Shroud, Black Part Number: 1RN30DX9AD
$21.87 MSRP: $31.45
You Save: $9.58 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Upper; Shroud; Shroud Steering Column Upper
- Position: Upper
- Replaces: 1RN30DX9AC, 1RN30DX9AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Journey | AVP, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Lower Shroud, Black Part Number: 1RP30DX9AD
$38.22 MSRP: $54.95
You Save: $16.73 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Shroud; Shroud Steering Column Lower
- Position: Lower
- Replaces: 1RP30DX9AB, 1RP30DX9AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Journey | AVP, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SXT | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Journey Lower Shroud, Dark Gray Part Number: 1GA13XDVAC
$73.70 MSRP: $84.55
You Save: $10.85 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Shroud Steering Column Lower
- Position: Lower
- Replaces: 1GA13XDVAA, 1GA13XDVAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Base, Crew, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Upper Shroud, Gray Part Number: 1JL081DVAB
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Upper; Shroud; Shroud Steering Column Upper
- Position: Upper
- Replaces: 1JL081DVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Base, Crew, R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Upper Shroud, Beige Part Number: 1JL081KAAB
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Upper; Shroud Steering Column Upper
- Position: Upper
- Replaces: 1JL081KAAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Base, Crew, R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Column Cover, Gray, Lower Part Number: 1HS28XDVAB
Product Specifications
- Other Name: Cover - Steering Column; Instrument Panel Trim Panel, Lower; Cover Steering Column
- Position: Lower
- Replaces: 1RV19XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Base, Crew, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Column Cover, Beige, Lower Part Number: 1HS28DK7AB
Product Specifications
- Other Name: Cover - Steering Column; Instrument Panel Trim Panel, Lower; Cover Steering Column
- Position: Lower
- Replaces: 1RV19DK7AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Base, Crew, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Journey Lower Shroud, Beige Part Number: 1GA13DK7AC
Product Specifications
- Other Name: Shroud - Steering Column; Steering Column Cover, Lower; Shroud; Shroud Steering Column Lower
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Journey | Base, Crew, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS

Dodge Journey Steering Column Cover

Choose OEM Steering Column Cover that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Steering Column Cover follows strict manufacturing steps to lock in quality and fit. If your Dodge Journey matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Journey parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Journey Steering Column Cover Parts and Q&A

Upper Shroud, Gray
1JL081DVAB
Q: How to Install a Steering Column Cover for Upper on Dodge Journey?
A:
Press the four upper shroud gap hider retaining tabs inside the four mounting holes of the Instrument Cluster, then push them upward to hold the upper shroud onto the steering column. Third, use the side retaining tabs of the shroud gap hiders and join them with the side mounting holes. After the column tilt lever is down, put the lower shroud on top of the lever and the column. Latch the upper shroud to the lower one and put in the three screws connecting the lower shroud to the column. Be sure the column tilt is right at the top, position the control lever upward and lastly mount the reinforcement support with the four supplied screws.
Upper Shroud, Beige
1JL081KAAB
Q: How to Remove and Repair a Steering Column Cover for Upper on Dodge Journey?
A:
You should begin by tugging on the lever that raises the steering wheel column to the top. After that, uncover the steering column opening. After that, remove the two steering column cover reinforcement screws and remove the the steering column cover reinforcement. Then, put the column at its lowest angle and leave the tilt lever set to released. When removing lower shrouds, first open the screws and press along both sides at the same location to disconnect them. As soon as you knock off the lower shroud, pull the column all the way out. Lift the shroud gap hider behind where it is blocked and intelligage two side and four upper tabs that hold it to the Instrument Cluster. Lastly, remove the top cover that goes over the column.