When taking out the steering wheel, confirm the tires are facing forward, connect the negative
Battery Cable to disable the air bags so they won't unwittingly deploy. Don't proceed until the air bag system capacitor discharges for two minutes. Remove the driver air bag and take out the wiring connector at the
Clock Spring. Once the wheel is clamped down, unbolt the connection between the steering wheel and the steering shaft. It's important not to tap or hit the steering wheel or its column during this step. Place a wheel puller with hooked legs onto the steering shaft. Be sure not to spin the Clock Spring rotor after removing the steering wheel, because it should stay in place to avoid harm. If you are unsure where the Clock Spring goes, center it with the procedure before fixing the steering wheel. After that, still keeping the wheel straight ahead, slide the wheel puller onto the steering column shaft and remove the wheel from the splines.