How to Install an Ambient Temperature Sensor on Dodge Magnum?

With the sensor on the bottom of the front bumper beam, fit the push pin in the hole to keep it secure. Following that, plug the ambient air temperature sensor into the wire harness connector and add the front end belly pan. After you're done, slowly lower the car and secure the negative battery cable back into place.

OEM Dodge Magnum Ambient Temperature Sensor

Inside Outside Auto Thermometer Gauge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ambient Temperature Sensor found

View related parts
Dodge Magnum Temperature Sensor, Front Part Number: 68518243AA
$47.14 MSRP: $69.85
You Save: $22.71 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Ambient Temperature; Air Temp, Front; Battery Temp; Coolant Temp.; Ambient Temperature Sensor; Air Temperature Sensor; Temperature Sending Unit; Sentinel Sensor
- Position: Front
- Replaces: 5149025AA, 5149265AB, 56042395
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Magnum Ambient Temperature Sensor

Choose OEM Ambient Temperature Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Ambient Temperature Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Magnum matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Magnum parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Ambient Temperature Sensor also known as Throttle Position Sensor in Dodge Magnum vehicles is a critical component used to measure the air getting to the engine intake. This sensor, in addition to the Mass Air Flow (MAF) sensor sends information to the Powertrain Control Module (PCM) to adjust the correct ratio of air to fuel mixture for combustion. An improperly functioning Ambient Temperature Sensor may cause problems like stalling or a bad air/fuel mixture which will turn ON the CHECK ENGINE light. Dodge Magnum automobiles, automobiles might install MAF and VAF Ambient Temperature Sensors. Both are fixed to quantify relative amounts of airflow and they are custom-built to complement certain fuel injectors. Whereas factory sensors do allow for some performance modifications, large increases in air flow may necessitate the use of a higher quality Ambient Temperature Sensor.

Dodge Magnum Ambient Temperature Sensor Parts and Q&A

Temperature Sensor, Front
68518243AA
Q: How to Install an Ambient Temperature Sensor on Dodge Magnum?
A:
With the sensor on the bottom of the front bumper beam, fit the push pin in the hole to keep it secure. Following that, plug the ambient air temperature sensor into the wire harness connector and add the front end belly pan. After you're done, slowly lower the car and secure the negative Battery Cable back into place.