How to Service and Repair a Lower Intake Manifold on Dodge Magnum?

In order to re-service and repair the lower intake manifold, the first step is to relieve the fuel system pressure and ensure that that the negative battery cable in the trunk is disconnected. Disconnect the electrical connector pits to the injectors and the fuel rail it then unhooks the fuel supply hose off the upper intake manifold. Unplug the bolts that hold the fuel rail and withdraw the fuel rail and injectors as a unit. Then, clean the manifold connecting bolts and lower manifold, check it for damage, cracks, gasket surface damage or warping, and damaged fuel injector orifices; replace the manifold in case of difficulties. To install reuse gaskets that are not cut or torn and clean and check the surfaces intended to be sealed between the cylinder head and the manifold. Place the lower manifold gasket into position and place the manifold on the cylinder head surfaces making use of a bolt in the attaching hole in the furthest position to help in locating. Install fuel rail and injectors and run the bolts and then install manifold attaching bolts and tighten in the order specified and finally remove alignment bolt. Install the fuel injector electrical connectors such that injectors are properly installed in a way that they do not interfere with the upper intake manifold, and then the fuel supply hose can be connected with the fuel rail and finally install the upper intake manifold.

How to Remove and Replace the Lower Intake Manifold on Dodge Magnum?

Before starting to remove the lower intake manifold, first eliminate engine fuel pressure. After that, remove the negative battery cable from its terminal found in the trunk. Take out the intake manifold handled by the upper part and detach the wires to the injectors. After that, remove the fuel supply hose from the fuel rail. Eliminate the bolts connecting the fuel rail to the engine and extract the whole assembly that includes the fuel rail and injectors. Once that's done, get the bolts out and lift the lower manifold off the machine. Don't forget to look at the manifold.

OEM Dodge Magnum Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Intake Manifolds found

View related parts
Dodge Magnum Intake Plenum, Upper Part Number: 4591863AM
$1121.58 MSRP: $1705.00
You Save: $583.42 (35%)
ADD TO CART
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum; Plenum Intake Manifold; Intake Manifold
- Position: Upper
- Replaces: 4591863AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Magnum | SE, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Magnum Intake Manifold, Lower Part Number: 4591960AC
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | SE | 6 Cyl 2.7 L GAS
View related parts
Dodge Magnum Intake Manifold Part Number: 4591846BA
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes All Parts Listed Below; Manifold Intake
- Replaces: 4591846AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Magnum | R/T | 8 Cyl 5.7 L GAS
View related parts
Dodge Magnum Intake Plenum, Upper Part Number: 4591862AK
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum
- Position: Upper
- Replaces: 4591862AI, 4591862AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Magnum | SE | 2.7L V6, 6 Cyl 2.7 L GAS
View related parts
Dodge Magnum Intake Plenum, Upper Part Number: 68017975AA
$398.46 MSRP: $580.00
You Save: $181.54 (32%)
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum
- Position: Upper
- Replaces: 4591863AH, 4591863AI, 4591863AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Magnum | SE, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Magnum Intake Manifold, Lower Part Number: 4792184AE
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower, Upper; Manifold Intake
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | SE, SXT, SXT Special Edition | 6 Cyl 3.5 L GAS
View related parts
Dodge Magnum Plenum, Upper Part Number: 4591862AG
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum Intake Manifold
- Position: Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Magnum | SE | 6 Cyl 2.7 L GAS
View related parts
Dodge Magnum Intake Plenum, Upper Part Number: 68017986AA
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum
- Position: Upper
- Replaces: 4591862AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Magnum | SE | 6 Cyl 2.7 L GAS
View related parts
Dodge Magnum Intake Plenum, Upper Part Number: 68017985AA
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum
- Position: Upper
- Replaces: 4591863AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Magnum | SXT, SXT Special Edition | 6 Cyl 3.5 L GAS
View related parts
Dodge Magnum Intake Manifold Part Number: 4591846AJ
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold
- Replaces: 4591846AE, 4591846AG, 4591846AH, 4591846AF, 4591846AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Magnum | R/T | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Magnum Intake Plenum, Upper Part Number: 68017976AA
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum
- Position: Upper
- Replaces: 4591862AF, 4591862AH, 4591862AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Magnum | SE | 2.7L V6, 6 Cyl 2.7 L GAS
View related parts
Dodge Magnum Intake Manifold Part Number: 5037510AK
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold
- Replaces: 5037510AJ, 5037510AH, 5037510AG, 5037510AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Magnum | SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS

Dodge Magnum Intake Manifold

Choose OEM Intake Manifold that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Intake Manifold follows strict manufacturing steps to lock in quality and fit. If your Dodge Magnum matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Magnum parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

intake manifold of Dodge Magnum automobile is responsible for distributing the air or the air/fuel mixture to every cylinder, this part severely affects the power and engine functionality. It work by sucking in the air from the throttle body varying in style with regard to the engine type, carbureted, throttle body injected, or multiport fuel injected. Intake manifolds found in today's Magnum series Dodges are made from the composite plastic material which is lighter and a better thermo-setter than cast iron or aluminum. Variants of Intake Manifold, for instance, variable-length intake manifolds (VLIM), increases performance by constantly varying the length of the intake manifold to provide the premier response to non-possessing load. With this technology as well as with improvement in the material used, the Magnum becomes more efficient and delivers more power output.

Dodge Magnum Intake Manifold Parts and Q&A

Intake Manifold, Lower
4792184AE
Q: How to Service and Repair a Lower Intake Manifold on Dodge Magnum?
A:
In order to re-service and repair the lower intake manifold, the first step is to relieve the fuel system pressure and ensure that that the negative Battery Cable in the trunk is disconnected. Disconnect the electrical connector pits to the injectors and the Fuel Rail it then unhooks the fuel supply hose off the upper intake manifold. Unplug the bolts that hold the fuel rail and withdraw the fuel rail and injectors as a unit. Then, clean the manifold connecting bolts and lower manifold, check it for damage, cracks, gasket surface damage or warping, and damaged Fuel Injector orifices; replace the manifold in case of difficulties. To install reuse gaskets that are not cut or torn and clean and check the surfaces intended to be sealed between the cylinder head and the manifold. Place the lower manifold gasket into position and place the manifold on the cylinder head surfaces making use of a bolt in the attaching hole in the furthest position to help in locating. Install fuel rail and injectors and run the bolts and then install manifold attaching bolts and tighten in the order specified and finally remove alignment bolt. Install the fuel injector electrical connectors such that injectors are properly installed in a way that they do not interfere with the upper intake manifold, and then the fuel supply hose can be connected with the fuel rail and finally install the upper intake manifold.
Intake Manifold, Lower
4591960AC
Q: How to Remove and Replace the Lower Intake Manifold on Dodge Magnum?
A:
Before starting to remove the lower intake manifold, first eliminate engine fuel pressure. After that, remove the negative Battery Cable from its terminal found in the trunk. Take out the intake manifold handled by the upper part and detach the wires to the injectors. After that, remove the fuel supply hose from the Fuel Rail. Eliminate the bolts connecting the fuel rail to the engine and extract the whole assembly that includes the fuel rail and injectors. Once that's done, get the bolts out and lift the lower manifold off the machine. Don't forget to look at the manifold.