How is the Blower Motor Installed in the HVAC Housing on Dodge Nitro?

Place the blower motor into the bottom of the HVAC housing in order to install it. Hold the blower motor in place in the HVAC housing, then screw it down with three screws at 1.2 Nm (10 in. lbs.). Attach the end of the instrument panel wire harness connector to the blower motor. If the motorcycle model fits, secure the silencer under the left side of the instrument panel. Now, link up the negative battery cable again.

OEM Dodge Nitro Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motors found

View related parts
Dodge Nitro Blower Motor Part Number: 68003996AA
$163.15 MSRP: $244.00
You Save: $80.85 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; Blower Assembly; Motor Blower With Wheel; HVAC Blower Motor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Nitro | R/T, SE, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Blower Motor Part Number: 68038826AB
$179.68 MSRP: $270.00
You Save: $90.32 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor; Blower Assembly; Motor Blower With Wheel
- Replaces: 68038826AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2011 Dodge Nitro | Detonator, Heat, SE, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Blower Motor

Choose OEM Blower Motor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Blower Motor follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Blower Motor in Dodge Nitro cars is wear used in the heating and cooling system of the car to blasts hot or cool air to the interior cabin of the car. Its works by activating a fan that blows air in the vehicle's interior as drivers are able to control the temperature, by warming or cooling the car interior, especially after it has been left in the sun. Blower Motors of Dodge Nitro may vary in regards to its style of some models depend on some climate controls system. Some cars may employ a single blower motor while others especially large vehicles may have different motors for different functions with reference to airflow. It is however, these motor controls such as electronic control module and wiring among others that contribute to the failure of the Blower Motor block causing a compromise on the vehicle heating and air conditioning system.

Dodge Nitro Blower Motor Parts and Q&A

Blower Motor
68003996AA
Q: How is the Blower Motor Installed in the HVAC Housing on Dodge Nitro?
A:
Place the blower motor into the bottom of the HVAC housing in order to install it. Hold the blower motor in place in the HVAC housing, then screw it down with three screws at 1.2 Nm (10 in. lbs.). Attach the end of the instrument panel wire harness connector to the blower motor. If the motorcycle model fits, secure the silencer under the left side of the instrument panel. Now, link up the negative Battery Cable again.