How to Remove a Blower Motor Resistor on Dodge Nitro?

To take out the blower motor resistor, unhook and isolate the negative battery cable before waiting two minutes for the air bag capacitor to discharge. Let the resistor cool for at least five minutes since the blower motor is off by turning the resistor off. Pull down the glove box door and take out the wire connector from the blower motor resistor. After, remove the screws that attach the blower motor resistor to the HVAC housing and then take out the resistor.

How is the Blower Motor Resistor Installed on Dodge Nitro?

Once the HVAC housing (4) is removed, set the blower motor resistor (1) inside and attach it with the two screws (3), tightening both to 1.2 Nm (10 in. lbs.). After that, fit the wire harness connector onto the blower motor resistor, close the glove box and link the negative battery cable back to the chassis with a nut.

OEM Dodge Nitro Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
Dodge Nitro Resistor Part Number: 68003998AA
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; HVAC Blower Motor Regulator; Resistor Blower Motor; Blower Motor Resistor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Control Module, Front Part Number: 4885482AC
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control; Front Control Module; Blower Motor Resistor; Module; Resistor; Module Power Blower Motor
- Position: Front
- Replaces: 68003999AA, 68038199AA, RL885482AC, 4885482AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Blower Motor Resistor

Choose OEM Blower Motor Resistor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Blower Motor Resistor follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This Dodge Nitro Blower Motor Resistor is a very important and useful part to boost the efficiency and durability of the Dodge Nitro climate control system. This Blower Motor Resistor controls the speed of the blower motor that is supposed to maintain appropriate air flow within the car cabin This is very essential since climate in the car cabin should be controlled irrespective of the outdoor climate. The Blower Motor Resistor offered for Dodge Nitro is compatible with models manufactured in between the years 2007 and 2012; The unit is created to suit specific needs of the selected car model and deliver optimal performance in each case. The Blower Motor Resistor stands as another major facet of the Dodge Nitro that runs reliably to enhance the safety and efficiency of the vehicle, thus contributing appreciably to the vehicle's good reputation. First of all, it is necessary to mention that the Dodge Nitro Blower Motor Resistor is quite durable and has complex anatomic and electrical design, which makes it rather unique in the frames of automotive parts market. Another advantage of this innovation is that it enables the control of speed in the blower which increases the fuel efficiency because energy usage may be regulated depending on blower speed. The Blower Motor Resistor for the Dodge Nitro is well incorporated into the car's design and it can be said that this brand strives to develop high quality components that will enable drivers and passengers have a nice and safe ride. All in all, the Dodge Nitro Blower Motor Resistor perfectly exemplifies the company's efforts to manufacture first-rate automobiles.

Dodge Nitro Blower Motor Resistor Parts and Q&A

Resistor
68003998AA
Q: How to Remove a Blower Motor Resistor on Dodge Nitro?
A:
To take out the Blower Motor resistor, unhook and isolate the negative Battery Cable before waiting two minutes for the air bag capacitor to discharge. Let the resistor cool for at least five minutes since the blower motor is off by turning the resistor off. Pull down the glove box door and take out the wire connector from the blower motor resistor. After, remove the screws that attach the blower motor resistor to the HVAC housing and then take out the resistor.
Control Module, Front
4885482AC
Q: How is the Blower Motor Resistor Installed on Dodge Nitro?
A:
Once the HVAC housing (4) is removed, set the blower motor resistor (1) inside and attach it with the two screws (3), tightening both to 1.2 Nm (10 in. lbs.). After that, fit the wire harness connector onto the blower motor resistor, close the glove box and link the negative Battery Cable back to the chassis with a nut.