How to Service the Right Windshield Wiper Switch on Dodge Nitro?

Turn off the Supplemental Restraint System (SRS) by disconnecting and isolating the battery's negative cable and after two minutes wait for the air bag system capacitor to empty before working on the multifunction switch. Organize the project by removing the steering cover on top and on the bottom. After that, remove the screw fixing the right multi-function switch to the bracket on the Clock Spring's right side. Pull the switch toward the Clock Spring to separate the slide tabs in the switch housing from the mounting bracket's channel formations. Remove the jumper wire harness connector from the connector receptacle on the inboard side of the right multi-function switch and then take out the switch from the Clock Spring.

How to Install the Right Windshield Wiper Switch on Dodge Nitro?

Before installing the right multifunction switch, you should turn off the supplemental restraint system by unhooking the negative battery cable, wait two minutes for the system capacitor to lose electricity and then rehook the negative cable. Clamp the multi-function switch alongside the bracket on the right side of the Clock Spring and wire up the harness to the connector on the inboard side of the switch. Make sure the tabs on your slide switches match the slot formations on the Clock Spring mounting bracket. Then, push the switches gently until they are firmed in the bracket. Put the screw on the mounting tab's back into the hole on the Clock Spring, secure it and check that it is tightened to 1 Nm (10 in. lbs.). Attach both shrouds to the column and then reconnect the negative battery cable after that.

OEM Dodge Nitro Windshield Wiper Switch

Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Windshield Wiper Switchs found

View related parts
Dodge Nitro Turn Signal Switch Part Number: 68041485AD
$122.34 MSRP: $172.00
You Save: $49.66 (29%)
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Signal Switch; Switch Multifunction
- Replaces: 5183947AC, 68041485AA, 68041485AB, 5183947AA, 68041485AC, 5183947AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, Shock, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Turn Signal Switch Part Number: 68015101AG
$95.89 MSRP: $144.00
You Save: $48.11 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Switch Multifunction
- Replaces: 68015101AE, 68015101AD, 68015101AC, 68015101AF, 68015101AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Nitro | Detonator, Heat, R/T, SE, Shock, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Wiper Switch Part Number: 68003215AD
$75.82 MSRP: $114.00
You Save: $38.18 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Wiper; Windshield Wiper Switch; Windshield Washer Switch; Front Wiper Switch; Switch Wiper
- Replaces: 68003215AC, 5183957AA, 68003215AB, 68003215AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, Shock, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Turn Signal Switch Part Number: 5183952AF
$55.75 MSRP: $83.35
You Save: $27.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5183952AA, 5183952AC, 5183952AB, 5183952AD, 5183952AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Nitro | Detonator, Heat, R/T, SE, Shock, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Turn Signal Switch Part Number: 5183950AF
Product Specifications
- Other Name: Switch - Multifunction; Steering Column Switch Housing; Combination Switch; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch Multifunction
- Replaces: 5183950AE, 5183950AD, 5183950AC, 5183950AB, 5183950AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Nitro | R/T, SE, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Turn Signal Switch Part Number: 5183946AF
Product Specifications
- Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch Multifunction
- Replaces: 5183946AA, 5183946AD, 5183946AE, 5183946AB, 5183946AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, Shock, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Windshield Wiper Switch

Choose OEM Windshield Wiper Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Windshield Wiper Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Nitro Windshield Wiper Switch Parts and Q&A

Turn Signal Switch
5183950AF
Q:
How to Service the Right Windshield Wiper Switch on Dodge Nitro?
A:
Turn off the Supplemental Restraint System (SRS) by disconnecting and isolating the battery's negative cable and after two minutes wait for the air bag system capacitor to empty before working on the multifunction switch. Organize the project by removing the steering cover on top and on the bottom. After that, remove the screw fixing the right multi-function switch to the bracket on the Clock Spring's right side. Pull the switch toward the Clock Spring to separate the slide tabs in the switch housing from the mounting bracket's channel formations. Remove the jumper wire harness connector from the connector receptacle on the inboard side of the right multi-function switch and then take out the switch from the Clock Spring.
Turn Signal Switch
5183946AF
Q:
How to Install the Right Windshield Wiper Switch on Dodge Nitro?
A:
Before installing the right multifunction switch, you should turn off the supplemental restraint system by unhooking the negative Battery Cable, wait two minutes for the system capacitor to lose electricity and then rehook the negative cable. Clamp the multi-function switch alongside the bracket on the right side of the Clock Spring and wire up the harness to the connector on the inboard side of the switch. Make sure the tabs on your slide switches match the slot formations on the Clock Spring mounting bracket. Then, push the switches gently until they are firmed in the bracket. Put the screw on the mounting tab's back into the hole on the Clock Spring, secure it and check that it is tightened to 1 Nm (10 in. lbs.). Attach both shrouds to the column and then reconnect the negative battery cable after that.