JeepParts
My Garage
My Account
Cart
OEM Dodge Power Steering Pressure Switch
Power Steering Oil Pressure Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Power Steering Pressure Switches found
Dodge Power Steering Pressure Switch, Front Part Number: 4606045
$60.71 MSRP: $91.00You Save: $30.29 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Switch - Power Steering; Power Steering Pressure Switch, Front; Switch; Gear Assembly, Power Steering Spo Proportional; Module, Solenoid Control Valve W/Bracket; Switches.
- Position: Front
Dodge Pressure Switch, Front Part Number: 56041335AB
$48.21 MSRP: $71.55You Save: $23.34 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Switch - Power Steering; Power Steering Pressure Switch, Front; Power Steering Pressure Switch; Switch; Switch Power Steering Pressure; Switch Power Steering
- Position: Front
Dodge Switch, Front Part Number: 56041335AC
$41.61 MSRP: $61.05You Save: $19.44 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Switch - Power Steering; Power Steering Pressure Switch, Front
- Position: Front
Dodge Pressure Switch, Front Part Number: 56027906AC
Product Specifications- Other Name: Switch - Power Steering; Power Steering Pressure Switch, Front; Switch
- Position: Front
Dodge Power Steering Pressure Switch
OEM parts sourced directly from Dodge deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Dodge Power Steering Pressure Switch for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.
Dodge Power Steering Pressure Switch Parts and Q&A
- Q: How to Remove and Install a Power Steering Pressure Switch on Dodge Dakota?A:It can be found inside the power steering high-pressure hose at the steering gear pump end. Begin by removing the electrical connector from the switch and put a container or shop towel under the switch before you take it out. Are careful to release the switch using an additional wrench on the power steering line, so you don't damage it. Once installed, insert the power steering switch into the steering hose and turn the torque to a value of 14 - 22 Nm (124 - 195 in. lbs.). Attach the electrical connector back to the switch, check how much power steering fluid there is and add some if it's low. Once the engine is running, look at the power steering fluid and add another serving if the level is still low.
- Q: How to Properly Handle a Power Steering Pressure Switch for Your Dodge Ram 1500?A:When repairing or servicing your vehicle, always be gentle when handling the power steering pressure switch which is in the hose. Remove the electrical connector from the pressure switch and cover it with a small container or shop towel, so any leakage is contained. Lift the power steering line with a back up wrench to prevent pressing on the switch. Only the 3.7L V-6 and 4.7L, 5.7L V-8 engines are supported by this switch. Tighten the switch into position on the power steering line with a torque of between 8 and 11 Nm (around 70 to 100 in. lbs.). Links the electrical connector to the switch, checks the steering fluid level and tops up the fluid as needed. Start the car and once more observe the power steering fluid. If necessary, add some more fluid.
