How to Safely Service and Properly Install an Air Bag Sensor on Jeep Commander?

The first step to servicing the front impact sensor is to disable the SRS by disconnecting the negative cable from the battery, isolating it and waiting two minutes for all the current in the system capacitor to drain. Do not drop or hit the front impact sensor, since it can become damaged or recalibrated; if you drop it, you'll need to buy a new one for your vehicle. The sensors can be used on either the front or side of the vehicle. Place the impact sensor onto the stud on the bracket at the back of the right or left radiator support vertical member in the engine compartment, aligning its anti-rotation pins with the clearance holes. Hold the sensor steady by connecting the nut to the stud and fastening it to 8 Nm or 70 in. lbs. torque. Connect the headlamp and dash wire harness to the sensor connector receptacle, but wait until after the verification test procedure to connect the battery negative cable once more after working on any SRS component.

OEM Jeep Commander Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Bag Sensors found

View related parts
Jeep Commander Impact Sensor, Front Part Number: 4671779AC
$48.02 MSRP: $103.00
You Save: $54.98 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Front Impact Sensor; Side Impact Sensor; Airbag Impact Sensor.
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Impact Sensor, Front Part Number: 4896173AA
$189.21 MSRP: $279.00
You Save: $89.79 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Sensor Side Airbag Impact; Sensor Impact
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Impact Sensor, Front Part Number: 4896083AA
$270.79 MSRP: $402.00
You Save: $131.21 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Airbag Impact; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Side Airbag Impact
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Jeep Commander | Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Air Bag Sensor

Choose OEM Air Bag Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Air Bag Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Air Bag Sensor is one of the most important components for Jeep Commander automobiles. This is an enhanced type of crash sensor that is meant to feel an impact during an accident through which it instantly sends a signal to the control unit that triggers the air bags thus increasing passenger safety. Air Bag Sensor assumes the responsibility of the safety circuit in all Commander models - the Jeep Commander XK and the Jeep Meridian 2022 also incorporated the circuit. This shows consistency because it has been found that it works well with all different models of Jeep Commander ensuring it offers the optimal performance in the incidences where crashes occur and in the activation of the air bags. The Air Bag Sensor does not only make the car safer but also helps in the efficient operation of the car and the bag because it determines when to inflate them in the case of an accident to reduce the possibility of an injury. Highlighted features of the Air Bag Sensor are its durability and speed: they are considered to be industry leaders. Due to its reliability and proven performance over the time, general public has accepted Air Bag Sensor as an essential part of any Jeep Commander and hence it has undoubtedly, become a safer bet for passenger's safety. Therefore, Air Bag Sensor is a revelation that enables enhanced safety and performance of Jeep vehicles making driving exciting again and creating confidence for the Jeep commanders' passengers.

Jeep Commander Air Bag Sensor Parts and Q&A

Impact Sensor, Front
4896083AA
Q: How to Safely Service and Properly Install an Air Bag Sensor on Jeep Commander?
A:
The first step to servicing the front impact sensor is to disable the SRS by disconnecting the negative cable from the battery, isolating it and waiting two minutes for all the current in the system capacitor to drain. Do not drop or hit the front impact sensor, since it can become damaged or recalibrated; if you drop it, you'll need to buy a new one for your vehicle. The sensors can be used on either the front or side of the vehicle. Place the impact sensor onto the stud on the bracket at the back of the right or left radiator support vertical member in the engine compartment, aligning its anti-rotation pins with the clearance holes. Hold the sensor steady by connecting the nut to the stud and fastening it to 8 Nm or 70 in. lbs. torque. Connect the headlamp and dash wire harness to the sensor connector receptacle, but wait until after the verification test procedure to connect the battery negative cable once more after working on any SRS component.