How to install Parking Brake Shoes on Jeep Grand Cherokee?

Put the park brake shoes on the actuator lever before anything else. Afterward, ensure the shoes are locked onto the support plate using hold down clips and pins so they are effectively engaged with the park brake actuator lever. Put in the return spring, then grease the adjuster screw assembly so its toothed end fits into the shoes and the passage aligns with the center hole in the support plate. For each shoe, hold the adjuster spring in place with one hand and thread it onto the hook attached to the shoe with the other hand using needle nose pliers. After that, fit the axle shaft to the back differential and fasten the axle flange nuts tightly. Let's attach a rotor to the hub and fit the caliper using the two mounting bolts, tightening both to 44 Nm (32 ft. lbs.). Loosen the parking brake shoes, put the wheel and tire on, lower the car and test that the parking brake works properly.

How to Install Parking Brake Shoes After Replacement on Jeep Wrangler?

The first thing to do after changing the park brake shoes is to put the rear shoes back together. After that, attach the support plate (1) to the axle shaft (2) and join the axle shaft (1) to the axle housing. Bind the brake cable end (1) to the park brake shoe lever (2) which you can see behind the support plate. Install the rearch wheel speed sensor (3) and adjust the rear brake shoes. Then, attaches the disc brake rotor and the disc brake caliper adapter. After that, install the wheel and tire unit and lower the car. Affix the rear park brake cables (2) to the equalizer, pull off the lockout at the front park brake lever (1) and test how the park brake works. Install the center floor console in the last stage. Stopping the car with light to moderate force after it has received new lining is recommended and should be done only on dry pavement at 25 mph.

OEM Jeep Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Parking Brake Shoes found

View related parts
Jeep Parking Brake Shoes, Rear Part Number: 5191215AB
$121.95 MSRP: $187.00
You Save: $65.05 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Shoe And Lining Parking Brake; Parking Brake Shoe
- Position: Rear
- Replaces: 5191215AA
Fits the following Jeep Models:
- Compass | 2007-2017 | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Patriot | 2007-2017 | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Brake Shoes, Rear Part Number: 5191306AA
$40.59 MSRP: $61.20
You Save: $20.61 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Drum; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes; Shoes; Shoe And Lining Kit Drum; Drum Brake Shoe
- Position: Rear
Fits the following Jeep Models:
- Compass | 2007-2017 | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Patriot | 2009-2017 | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Parking Brake Shoes, Rear Part Number: 68003589AA
$60.76 MSRP: $91.60
You Save: $30.84 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Brake Shoes Front; Shoes; Shoe And Lining Kit Parking Brake; Shoe And Lining Kit Drum; Parking Brake Shoe
- Position: Rear
Fits the following Jeep Models:
- Gladiator | 2020-2025 | 80th Anniversary, Altitude, Freedom, High Altitude, Launch Edition, Mojave, Mojave X, NightHawk, Overland, Rubicon, Rubicon X, Sport, Sport S, Texas Trail, Willys, Willys Sport | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS
- Liberty | 2008-2012 | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
- Wrangler | 2007-2025 | 70th Anniversary, 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X, X-S | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.8 L GAS, 8 Cyl 6.4 L GAS
- Wrangler JK | 2018 | Rubicon, Sahara, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 6 Cyl 3.6 L GAS
View More
View related parts
Jeep Parking Brake Shoes, Rear Part Number: 4560176AA
$144.95 MSRP: $217.00
You Save: $72.05 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Parking Brake Shoe
- Position: Rear
Fits the following Jeep Models:
- Grand Cherokee | 2011-2022 | 4xe, 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Summit Reserve, Trackhawk, Trailhawk, Upland | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
- Grand Cherokee WK | 2022 | Laredo E, Laredo X, Limited | 6 Cyl 3.6 L FLEX
View related parts
Jeep Parking Brake Shoes, Rear Part Number: 5086930AC
$164.38 MSRP: $218.00
You Save: $53.62 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Parking Brake Shoe; Shoes
- Position: Rear
- Replaces: 5086930AA, 5086930AB
Fits the following Jeep Models:
- Commander | 2006-2010 | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
- Grand Cherokee | 2005-2010 | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Parking Brake Shoes, Rear Part Number: 5093390AC
$61.21 MSRP: $153.00
You Save: $91.79 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Parking Brake Shoe; Shoes
- Position: Rear
- Replaces: 5093390AA, 5093390AB
Fits the following Jeep Models:
- Grand Cherokee | 1994-1998 | 5.9 Limited, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Liberty | 2003-2007 | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
- Wrangler | 2003-2006 | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 4 Cyl 2.4 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View More
View related parts
Jeep Shoes Part Number: 5011988AB
$190.54 MSRP: $273.00
You Save: $82.46 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe
Fits the following Jeep Models:
- Grand Cherokee | 1999-2004 | Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Brake Pads, Front Part Number: 68574695AA
$67.07 MSRP: $101.00
You Save: $33.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Parking Brake Shoe; Brake Shoes; Front Pads
- Position: Front
- Replaces: 5191229AA, 5191244AA, 5191231AA, 68020494AA, 68020494AB
Fits the following Jeep Models:
- Compass | 2007-2017 | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Patriot | 2007-2017 | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Parking Brake Shoe

OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Parking Brake Shoe for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Jeep Parking Brake Shoe are hardened by the action of pulling the parking lever. Jeep rides are indifferent to gravel, snow and city potholes since the old wartime concept of the chassis never passed away and the new Selec-Terrain dial merely provides the brain to the brawn. Interior Jeep cabins are now flashing slick touch screens, voice control and over-the-air tweaks but they still have drain plugs in the floor so that mud can get out quicker than it got in. Campouts in the wilderness that require a venture deep into the woods confirm that being a Jeep owner is about waving to the other square-headlight driver at dusk as much it is about going up an eroded ridge at daybreak. The initial civilian CJ of 1945 would have made the same vow: go anywhere, roof off, smile on. The Parking Brake Shoe is made of heat-toughened steel and high-grip lining and pushes outwards on the wall of the drum the instant the cable is pulled, turning the force of the driver into brutal holding friction even on a slope. Since the Parking Brake Shoe is located in the rear hub, it is attacked on a daily basis with dirt, salt and water, thus the thick material combats corrosion and clings to its structure. The Parking Brake Shoe does not fade when left in a park over days, thus release is crisp and wheels roll with no groans. The lining thickness includes easy visual indicators to owners indicating when the Parking Brake Shoe is due to retire, eliminates the guesses and ensures the stopping force is honest.

Jeep Parking Brake Shoe Parts and Q&A

Parking Brake Shoes, Rear
5086930AC
Q: How to install Parking Brake Shoes on Jeep Grand Cherokee?
A:
Put the park brake shoes on the actuator lever before anything else. Afterward, ensure the shoes are locked onto the support plate using hold down clips and pins so they are effectively engaged with the park brake actuator lever. Put in the return spring, then grease the adjuster screw assembly so its toothed end fits into the shoes and the passage aligns with the center hole in the support plate. For each shoe, hold the adjuster spring in place with one hand and thread it onto the hook attached to the shoe with the other hand using needle nose pliers. After that, fit the axle shaft to the back differential and fasten the axle flange nuts tightly. Let's attach a rotor to the hub and fit the caliper using the two mounting bolts, tightening both to 44 Nm (32 ft. lbs.). Loosen the parking brake shoes, put the wheel and tire on, lower the car and test that the parking brake works properly.
Parking Brake Shoes, Rear
68003589AA
Q: How to Install Parking Brake Shoes After Replacement on Jeep Wrangler?
A:
The first thing to do after changing the park brake shoes is to put the rear shoes back together. After that, attach the support plate (1) to the axle shaft (2) and join the axle shaft (1) to the axle housing. Bind the brake cable end (1) to the park brake shoe lever (2) which you can see behind the support plate. Install the rearch wheel speed sensor (3) and adjust the rear brake shoes. Then, attaches the disc brake rotor and the disc brake caliper adapter. After that, install the wheel and tire unit and lower the car. Affix the rear park brake cables (2) to the equalizer, pull off the lockout at the front park brake lever (1) and test how the park brake works. Install the center floor console in the last stage. Stopping the car with light to moderate force after it has received new lining is recommended and should be done only on dry pavement at 25 mph.