How to Remove and Install a Throttle Position Sensor on the Throttle Body on Jeep Cherokee?

The TPS is connected right to the throttle body. Start by taking off the tube that links the air cleaner to the throttle body and afterward, take out the TPS electrical connector. After that, loosen the TPS bolts and take away the TPS. When installing, let the throttle shaft end of the throttle body enter the socket of the TPS so it can rotate about 20-25 degrees; if the sensor does not move, try flipping the throttle shaft around and fit the shaft into the alternate side of the socket tangs. Slight stress will be noticed in the TPS after rotating it. Anti-rattle the engine installation and secure it with the retaining screws, torquing them to 7 Nm (60 in. lbs.) full force. Seat the electrical side of the TPS connector, use the throttle control by hand to ensure it moves freely and at last, fit the air cleaner tube into the throttle body.

How to Install and Remove a Throttle Position Sensor (TPS) on Jeep Wrangler?

You can remove the Throttle Position Sensor (TPS) by disconnecting its electrical wire, removing the two mounting screws and taking out the TPS from the throttle body. When you set up the throttle, insert the throttle shaft end of the throttle body into the sensor's socket and make sure the sensor can rotate a little; if it doesn't, attach the sensor with the throttle shaft on the side of the socket tangs that are not currently being levered down. Rotating a model with TPS will cause light stress on the shape. The process is completed when the TPS and retaining screws are set and the aluminum screws are tightened to 7 Nm (60 in. lbs.) torque. When you're finished connecting the TPS electrical connector, use the throttle yourself to see if it operates smoothly and only then start the engine and add the air cleaner tube over the throttle body.

OEM Jeep Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Throttle Position Sensors found

View related parts
Jeep Throttle Position Sensor Part Number: 68404428AA
$61.51 MSRP: $85.05
You Save: $23.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor
- Replaces: 5019411AD, 5019411AB, 5019411AC
Fits the following Jeep Models:
- Commander | 2006 | 65th Anniversary Edition, Base | 3.7L V6, 6 Cyl 3.7 L GAS
- Grand Cherokee | 2002-2006 | 65th Anniversary Edition, Laredo, Limited, Special Edition, Sport | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
- Liberty | 2002-2007 | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
- Wrangler | 2003-2006 | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 4 Cyl 2.4 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View More
View related parts
Jeep Throttle Position Sensor Part Number: 68433984AA
$102.36 MSRP: $156.00
You Save: $53.64 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor
- Replaces: 4874371AC
Fits the following Jeep Models:
- Cherokee | 1999-2001 | Classic, Limited, SE, Sport | 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
- Grand Cherokee | 1998-2001 | Laredo, Limited | 4.0L V6, 6 Cyl 4.0 L GAS
- Wrangler | 1998-2002 | SE, Sahara, Sport, X | 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View More
View related parts
Jeep Throttle Position Sensor Part Number: 5017479AA
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor; Sensor Kit Throttle Position
- Replaces: 4882219
Fits the following Jeep Models:
- Commander | 2006-2007 | 65th Anniversary Edition, Base, Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
- Grand Cherokee | 1997-2007 | 5.9 Limited, 65th Anniversary Edition, Laredo, Limited, Orvis, Overland, Special Edition, Sport, TSi | 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Throttle Position Sensor Part Number: 33004650
Product Specifications
- Other Name: Sensor; Throttle Positionition Sensor; Sensor Package, Throttle Position - Automatic Transmission
Fits the following Jeep Models:
- Cherokee | 1987-1990 | Base, Chief, Laredo, Limited, Pioneer, Sport | 6 Cyl 4.0 L GAS
- Comanche | 1987-1990 | Base, Chief, Eliminator, Laredo, Pioneer | 6 Cyl 4.0 L GAS
- Wagoneer | 1987-1990 | Base, Limited | 6 Cyl 4.0 L GAS
View More
View related parts
Jeep Throttle Position Sensor Part Number: 4778463
Product Specifications
- Other Name: Sensor Packkage - Throttle Position; Throttle Position, 3.0 Engine; (Use Insul. 4638997, 4419552, 2.5 Engine)
Fits the following Jeep Models:
- Grand Cherokee | 1994-1996 | Laredo, Limited, Orvis, SE | 8 Cyl 5.2 L GAS

Jeep Throttle Position Sensor

OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Throttle Position Sensor for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Jeep Throttle Position Sensor provides the engine with accurate throttle angle data to provide rapid and smooth power. Jeep has expanded battlefield grit to civilian adventure rigs that shake off sand, mud, and snow. Jeep drivers flick Selec-Terrain dial and have bitey traction systems so that hard trails seem easy. The freedom of the open air and digital dashboards, voice command, and over-the-air tweaks can now be combined in Jeep cabins. The Jeep loyalty is good as the owners are more than showroom gloss with trails, tips, and campfires. Stiff frames, cut overhangs, and ingenious gearing have the rigs crawling where amateurs spin. The air is allowed to pass through removable doors and the fold-down windshield ensures that sightlines are not glare-producing. Trail cams, skid plates, and recovery hooks are integrated and not fitted on afterwards. Throttle Position Sensor is attached to throttle body and informs the computer of the degree to which the plate is opened by the pedal. Throttle Position Sensor employs the non-contact Hall or magnetoresistive technology to avoid wear that was common with the outdated potentiometers. Throttle Position Sensor ensures that the fuel spray is at equilibrium with the boost to ensure that power is on hand at all times and economy remains reasonable. Throttle Position Sensor failure displays jerky throttle, rough idle, and limp response and therefore change quickly.

Jeep Throttle Position Sensor Parts and Q&A

Throttle Position Sensor
68433984AA
Q: How to Remove and Install a Throttle Position Sensor on the Throttle Body on Jeep Cherokee?
A:
The TPS is connected right to the throttle body. Start by taking off the tube that links the air cleaner to the throttle body and afterward, take out the TPS electrical connector. After that, loosen the TPS bolts and take away the TPS. When installing, let the throttle shaft end of the throttle body enter the socket of the TPS so it can rotate about 20-25 degrees; if the sensor does not move, try flipping the throttle shaft around and fit the shaft into the alternate side of the socket tangs. Slight stress will be noticed in the TPS after rotating it. Anti-rattle the engine installation and secure it with the retaining screws, torquing them to 7 Nm (60 in. lbs.) full force. Seat the electrical side of the TPS connector, use the throttle control by hand to ensure it moves freely and at last, fit the air cleaner tube into the throttle body.
Throttle Position Sensor
68404428AA
Q: How to Install and Remove a Throttle Position Sensor (TPS) on Jeep Wrangler?
A:
You can remove the Throttle Position Sensor (TPS) by disconnecting its electrical wire, removing the two mounting screws and taking out the TPS from the throttle body. When you set up the throttle, insert the throttle shaft end of the throttle body into the sensor's socket and make sure the sensor can rotate a little; if it doesn't, attach the sensor with the throttle shaft on the side of the socket tangs that are not currently being levered down. Rotating a model with TPS will cause light stress on the shape. The process is completed when the TPS and retaining screws are set and the aluminum screws are tightened to 7 Nm (60 in. lbs.) torque. When you're finished connecting the TPS electrical connector, use the throttle yourself to see if it operates smoothly and only then start the engine and add the air cleaner tube over the throttle body.