How to Install an Occupant Detection Sensor on Jeep Wrangler?

Roomy Place, eliminate any crinkling noises and focus on eliminating any distractions. Complete the steps below for this task: Put the occupant detection sensor above the studs on the front passenger seat adjuster lower rail and fasten it down with two nuts tightened to 28 Nm (21 ft. lbs.). Place the seat track risers on top of all four occupant detection sensor studs and line up the strain gauge alignment tool (Special Tool No. 9689) to keep the sensor from moving when installing and tightening the securing nut to 45 Nm (33 ft. lbs.). Lift the special tool onto every single occupant detection sensor, ensuring you secure and tighten the nuts on their studs. Attach the seat wire harness to the seat track position sensor and to every one of the occupant detection sensors. Take care not to reattach the negative battery cable while you are reinstalling the passenger side front seat into the car. When your service is done, carry out the testing requirements using the Occupant Restraint System test feature, the Occupant Classification System Verification Test, and the Occupant Classification Seat Weight tool.

OEM Jeep Wrangler Occupant Detection Sensor

OPDS Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Occupant Detection Sensors found

View related parts
Jeep Wrangler Occupant Sensor, Rear Part Number: 68297510AC
$37.24 MSRP: $55.35
You Save: $18.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Occupant Detection; Air Bag Seat Sensor Mat, Rear; Occupant Detection Sensor
- Position: Rear
- Replaces: 68297510AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2021 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Position Sensor Part Number: 68605049AA
$26.73 MSRP: $39.25
You Save: $12.52 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Seat Position; Occupant Sensor; Passenger Discriminating Sensor; Occupant Module; Sensor
- Replaces: 68035045AA, 5084008AA, 68313550AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2025 Jeep Wrangler | 70th Anniversary, 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X | 2.0L L4, 3.0L V6, 3.6L V6, 3.8L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.8 L GAS, 8 Cyl 6.4 L GAS

Jeep Wrangler Occupant Detection Sensor

Choose OEM Occupant Detection Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Occupant Detection Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Wrangler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Wrangler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Wrangler Occupant Detection Sensor Parts and Q&A

Position Sensor
68605049AA
Q: How to Install an Occupant Detection Sensor on Jeep Wrangler?
A:
Roomy Place, eliminate any crinkling noises and focus on eliminating any distractions. Complete the steps below for this task: Put the occupant detection sensor above the studs on the front passenger seat adjuster lower rail and fasten it down with two nuts tightened to 28 Nm (21 ft. lbs.). Place the seat track risers on top of all four occupant detection sensor studs and line up the strain gauge alignment tool (Special Tool No. 9689) to keep the sensor from moving when installing and tightening the securing nut to 45 Nm (33 ft. lbs.). Lift the special tool onto every single occupant detection sensor, ensuring you secure and tighten the nuts on their studs. Attach the seat wire harness to the seat track position sensor and to every one of the occupant detection sensors. Take care not to reattach the negative Battery Cable while you are reinstalling the passenger side front seat into the car. When your service is done, carry out the testing requirements using the Occupant Restraint System test feature, the Occupant Classification System Verification Test, and the Occupant Classification Seat Weight tool.