How to Maintain and Fix a Wheel Hub on Jeep Wrangler?

The process begins with raising and supporting the vehicle, then you remove the wheel and tire assembly. After that, remove the brake caliper, the rotor and the ABS wheel speed sensor. At the back of the steering knuckle, take out the cotter pin, nut retainer and axle hub nut, then the hub bearing mounting bolts. Remove the hub bearing from the steering knuckle and axle shaft. Initially, put the hub bearing and braking shield on the knuckle before tightening the hub bearing to the bolts with system pressure at 102 Nm (75 ft. lbs.). After that, place the hub washer and the hub nut, tighten the hub nut to 237 Nm (175 ft. lbs.), then install the nut retainer and a new cotter pin. Replace the brake rotor, caliper and wheel speed sensor, put the wheel and tire assembly back on, take out the support and bring the vehicle down on its wheels.

How to Service and Repair a Wheel Bearing and Wheel Hub on Jeep Wrangler?

First, support and lift the vehicle to reach the front hub and bearing, then set the wheel and tire aside. Make sure the caliper is supported, so it does not hang by its hose and go ahead and remove it. Then, remove the brake caliper adaptor and take out the disc brake rotor. After that, loosen and remove the bolt of the wheel speed sensor. Then, access the sensor through the hole in the brake shield. When possible, unscrew the axle shaft nut before taking out the bolts at the hub bearing's backside on the steering knuckle to remove the hub bearing from the steering knuckle.

OEM Jeep Wrangler Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Hubs found

View related parts
Jeep Wrangler Wheel Bearings, Front Part Number: 53007449AB
$252.45 MSRP: $520.00
You Save: $267.55 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Hub & Bearing; Front Hub & Bearing Assembly; Wheel Bearing and Hub Assembly.
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000, 1990-1995 Jeep Wrangler | Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
View related parts
Jeep Wrangler Hub & Bearing, Front Part Number: 52060398AE
$215.59 MSRP: $330.00
You Save: $114.41 (35%)
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Hub And Bearing Brake Front; Wheel Bearing and Hub Assembly; Wheel Bearing; Hub Assembly
- Position: Front
- Replaces: 52060398AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Jeep Wrangler | 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 3.6L V6, 3.8L V6, 6 Cyl 3.6 L GAS
View related parts
Jeep Wrangler Hub & Bearing, Front Part Number: 52060398AC
$210.74 MSRP: $315.00
You Save: $104.26 (34%)
ADD TO CART
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Hub And Bearing Brake Front; Wheel Bearing and Hub Assembly; Wheel Bearing; Hub Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Jeep Wrangler | 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Hub & Bearing, Front Part Number: 68272624AC
$191.48 MSRP: $282.00
You Save: $90.52 (33%)
Product Specifications
- Other Name: Hub & Bearing - Brake; Wheel Bearing and Hub Assembly, Front; Wheel Hub Repair Kit; Axle Bearing; Wheel Hub; Front Hub & Bearing; Hub And Bearing Brake Front; Wheel Bearing and Hub Assembly; Wheel Bearing
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Hub & Bearing, Front Part Number: 5016458AA
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Hub And Bearing Brake; Wheel Bearing and Hub Assembly; Wheel Bearing; Hub Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2006 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

Jeep Wrangler Wheel Hub

Choose OEM Wheel Hub that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Wheel Hub follows strict manufacturing steps to lock in quality and fit. If your Jeep Wrangler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Wrangler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

In terms of vehicles, The Wheel Hub of Jeep Wrangler automobiles is a central part that links wheels to cars hence effectively in maintaining stability as well as steering control. Some of the items that are housed inside include wheel bearings, sensors, and brake parts and thus enables the free rotation of the wheels while at the same time firmly fixing the wheels onto the Wrangler. Several configurations of Wheel Hubs have been used on jeep wrangler models in the course of the years, with changes in the bolt circumference and pattern. Due to this it is important to get a direct-fit replacement Wheel Hub that suits the needs of the Jeep Wrangler as much as possible. The proper installation of the assembly especially requires application of torque so as to avoid mechanical problems and this makes the Wheel Hub very crucial for the reliability and safety of the vehicle.

Jeep Wrangler Wheel Hub Parts and Q&A

Hub & Bearing, Front
5016458AA
Q: How to Maintain and Fix a Wheel Hub on Jeep Wrangler?
A:
The process begins with raising and supporting the vehicle, then you remove the wheel and tire assembly. After that, remove the Brake Caliper, the rotor and the ABS wheel speed sensor. At the back of the Steering Knuckle, take out the cotter pin, nut retainer and axle hub nut, then the hub bearing mounting bolts. Remove the hub bearing from the steering knuckle and Axle Shaft. Initially, put the hub bearing and braking shield on the knuckle before tightening the hub bearing to the bolts with system pressure at 102 Nm (75 ft. lbs.). After that, place the hub washer and the hub nut, tighten the hub nut to 237 Nm (175 ft. lbs.), then install the nut retainer and a new cotter pin. Replace the brake rotor, caliper and wheel speed sensor, put the wheel and tire assembly back on, take out the support and bring the vehicle down on its wheels.
Hub & Bearing, Front
52060398AC
Q: How to Service and Repair a Wheel Bearing and Wheel Hub on Jeep Wrangler?
A:
First, support and lift the vehicle to reach the front hub and bearing, then set the wheel and tire aside. Make sure the caliper is supported, so it does not hang by its hose and go ahead and remove it. Then, remove the Brake Caliper adaptor and take out the disc brake rotor. After that, loosen and remove the bolt of the wheel speed sensor. Then, access the sensor through the hole in the brake shield. When possible, unscrew the axle shaft nut before taking out the bolts at the hub bearing's backside on the Steering Knuckle to remove the hub bearing from the steering knuckle.