Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Dodge Dakota Blower Motor Resistor

Heater Blower Motor Resistor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

  • 2000 Dodge Dakota Blower Motor Resistor - 55056041AB
    2000 Dodge Dakota Blower Motor Resistor - 55056041AB
    2000 Dodge Dakota Blower Motor Resistor - 55056041AB
    2000 Dodge Dakota Blower Motor Resistor Diagram - 55056041AB
    View related parts

    2000 Dodge Dakota Resistor, Front Part Number: 55056041AB

    Product Specifications
    • Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Front; Resistor Blower Motor; Blower Motor Resistor
    • Position: Front
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 5.1 x 4.0 x 2.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 55056041AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Dakota Submodels:
    • Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
  • 2000 Dodge Dakota Blower Motor Resistor - 5003133AA
    2000 Dodge Dakota Blower Motor Resistor Diagram - 5003133AA
    View related parts

    2000 Dodge Dakota Blower Motor Resistor, Rear Part Number: 5003133AA

    Product Specifications
    • Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Rear; Booster Assembly; Resistor; Resistor Blower Motor
    • Position: Rear
    • Item Weight: 0.80 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5003133AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Dakota Submodels:
    • Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Dakota Blower Motor Resistor Parts and Q&A

  • Q: How to Maintain a Blower Motor Resistor on 2000 Dodge Dakota?
    A: It is important to unhook and make isolated the negative cable from your battery prior to servicing the blower motor resistor. Take out the cover or grille panel above the air intake on the cowl top. Use the cowl plenum access hole to insert your finger and remove the two hex screws holding the blower motor resistor to the cowl plenum panel. After pulling the blower motor resistor from the plenum panel, free enough wire to access the connector, remove the resistor from the harness connector and take out the entire harness from the vehicle. To install, attach the blower motor resistor to the wire harness connector and push the resistor and wire harness all the way back through the cowl plenum access hole and onto the cowl plenum panel. Connect and fasten the resistor by tightening the two screws to 2.2 Nm (20 in. lbs.). Connect the negative battery terminal, reinstall the cowl plenum cover/grille panel and that's it.

Related 2000 Dodge Dakota Parts

Alternate Year Models

+
1999 Dodge Dakota Blower Motor Resistor