How to Service a Dimmer Switch on 2000 Dodge Durango?

To service the dimmer switch you will need to disconnect the battery negative cable. Remove the steering column shrouds and a multi-function switch. Disconnect the instrument panel wire harness, and then remove and replace the switch. Reconnect the harness, tighten all connection and finally reconnect the battery negative cable.

OEM 2000 Dodge Durango Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2000 Dodge Durango Ignition Switch Part Number: 4728424
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Windshield Washer Switch.; Turn Signal Switch; Multifunction, Wiper, Headlamp Dimmer, Hazard, Signal & Tilt options.
- Item Weight: 1.40 Pounds
- Item Dimensions: 8.7 x 5.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4728424
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Dimmer Switch Parts and Q&A

Q: How to Service a Dimmer Switch on 2000 Dodge Durango?
A: To service the dimmer switch you will need to disconnect the battery negative cable. Remove the steering column shrouds and a multi-function switch. Disconnect the instrument panel wire harness, and then remove and replace the switch. Reconnect the harness, tighten all connection and finally reconnect the battery negative cable.