How to Maintain and Fix a Neutral Safety Switch on 2000 Dodge Durango?

To repair the Neutral Safety Switch, lift the vehicle and place a drain pan under the vehicle. Disconnect and take out the switch, center the operating lever in Park and Neutral positions. Install a new seal, tighten to 34 Nm, check continuity, re-connect wires, drive off vehicle, top off transmission fluid.

OEM 2000 Dodge Durango Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Neutral Safety Switch found

View related parts
2000 Dodge Durango Neutral Safety Switch Part Number: 56028181AC
Product Specifications
- Other Name: Switch - Neutral, Safety, Back Up
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028181AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Neutral Safety Switch Parts and Q&A

Q: How to Maintain and Fix a Neutral Safety Switch on 2000 Dodge Durango?
A: To repair the Neutral Safety Switch, lift the vehicle and place a drain pan under the vehicle. Disconnect and take out the switch, center the operating lever in Park and Neutral positions. Install a new seal, tighten to 34 Nm, check continuity, re-connect wires, drive off vehicle, top off transmission fluid.