OEM 2001 Jeep Grand Cherokee A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Compressor Cut-Out Switches found

  • 2001 Jeep Grand Cherokee A/C Compressor Cut-Out Switches Diagram - 4897617AA
    View related parts
    Product Specifications
    • Other Name: Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; High Pressure Cut-Off Switch; Switch; Switch A/C High Pressure Cut Off
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 1.1 x 1.1 x 2.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4897617AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Jeep Grand Cherokee Submodels:
    • 5.9 Limited, Laredo, Limited, Orvis, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
  • 2001 Jeep Grand Cherokee A/C Compressor Cut-Out Switches - 4897613AB
    2001 Jeep Grand Cherokee A/C Compressor Cut-Out Switches Diagram - 4897613AB
    View related parts
    Product Specifications
    • Other Name: Switch - A/C Cycling; A/C Compressor Cut-Out Switch; HVAC Pressure Switch; A/C Trinary Switch; Switch
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 2.1 x 0.9 x 0.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4897613AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Jeep Grand Cherokee Submodels:
    • Laredo, Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2001 Jeep Grand Cherokee A/C Compressor Cut-Out Switches Parts and Q&A

  • Q: How Do A/C Compressor Cut-Out Switches Relate to Low Pressure Sensor Service and Repair on 2001 Jeep Grand Cherokee?
    A: In order to service the low pressure sensor/switch, the first step is to configure the battery cable negatively. From above, pull the wire harness connector from the cycling clutch switch next to the accumulator. Take out the O-ring seal from the accumulator fitting on top, then unscrew the a/c low pressure switch from it and toss the seal away. When installing, coat a fresh O-ring seal with clean refrigerant oil for R-134a, fit it on the accumulator connection and only use the official O-rings and oil recommended by the manufacturer of the R-134a vehicle compressor. Screw the a/c low pressure switch onto the accumulator fitting by hand, connect the wire harness connector to the low pressure cycling clutch switch and then link the negative battery cable back to the car.

Related 2001 Jeep Grand Cherokee Parts