What Are A/C Compressor Cut-Out Switches and How Do They Function on Jeep Grand Cherokee?

Before servicing the low pressure sensor/switch, disconnect and isolate the battery negative cable. Separate the wire harness connector from the low pressure cycling clutch switch found at the top of the accumulator. Unfasten the low pressure cycling clutch switch from its top mounting on the accumulator and dispose of the O-ring seal from the accumulator fitting. Put a new O-ring seal on the accumulator fitting, lubricated with clean R-134a oil. During installation, put only special O-rings and refrigerant oil compatible with your vehicle's compressor. Attach the low pressure cycling clutch switch to the accumulator fitting, firmly tightening it by hand, then attach the other end of the wire harness connector to the switch. Usage requires the negative battery cable to be reconnected last.

What Are A/C Compressor Cut-Out Switches and How to Service Them on Jeep Grand Cherokee?

Make sure to first disconnect the negative battery cable before servicing the high pressure sensor/switch. Pull off the wire harness connector from the high pressure switch which is screwed into the discharge pipe between the compressor and the condenser inlet. Unscrew the high pressure switch from its place in the discharge line fitting and remove and discard its O-ring seal. After installing a fresh O-ring seal on the discharge line fitting with clean R-134a refrigerant oil, use only the particular O-rings given and the correct oil specified in the R-134a installation manual. Afterward, put the high pressure switch on the discharge line fitting, make sure it is nice and tight, reattach the wire harness connector to it and then reconnect the battery negative cable.

OEM Jeep Grand Cherokee A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 A/C Compressor Cut-Out Switches found

View related parts
Jeep Grand Cherokee Pressure Switch Part Number: 68308727AA
$101.04 MSRP: $133.00
You Save: $31.96 (25%)
ADD TO CART
Product Specifications
- Other Name: Transducer - A/C Pressure Transducer;Refrigerant Sensor,Compressor Cut Out,Valve Core,HVAC Switch; Pressure Transducer; Includes O-Ring; Valve A/C Pressure Transducer.
- Replaces: 68141376AB, 68156982AA, 68083824AA, 68141376AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, 75th Anniversary, 80th Anniversary, Altitude, Anniversary Edition 4xe, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Summit Reserve, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Pressure Relief Valve Part Number: 4720848
$47.47 MSRP: $60.18
You Save: $12.71 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - High Pressure Relief; A/C Compressor Relief & Control Valve; HVAC Pressure Switch.; Relief Valve; Compressor Assembly, 2.4L Engine (Nippondenso), W/Clutch; High Pressure Relief Valve.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1998 Jeep Grand Cherokee | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Clutch Cycling Switch Part Number: 4713511
$14.57 MSRP: $18.75
You Save: $4.18 (23%)
ADD TO CART
Product Specifications
- Other Name: Switch, A/C Cycling; A/C Compressor Cut-Out Switch; HVAC Pressure Switch; A/C Trinary Switch; Switch; Switch, Cycling
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1998 Jeep Grand Cherokee | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Pressure Switch Part Number: 4897617AA
Product Specifications
- Other Name: Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; High Pressure Cut-Off Switch; Switch; Switch A/C High Pressure Cut Off
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2001 Jeep Grand Cherokee | 5.9 Limited, Laredo, Limited, Orvis, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Pressure Switch Part Number: 4773190
Product Specifications
- Other Name: A/C High Pressure Cut Off; HVAC Pressure/Trinary Switch; Compressor Cut-Out; Refrigerant Hose; High Pressure Cut-Off Switch; Hose & Tube Assembly; A/C High Pressure Cut Off; Compressor Kit.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1998 Jeep Grand Cherokee | 5.9 Limited, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Clutch Cycling Switch Part Number: 4897613AB
Product Specifications
- Other Name: Switch - A/C Cycling; A/C Compressor Cut-Out Switch; HVAC Pressure Switch; A/C Trinary Switch; Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Jeep Grand Cherokee | Laredo, Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

Jeep Grand Cherokee A/C Compressor Cut-Out Switches

Choose OEM A/C Compressor Cut-Out Switches that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each A/C Compressor Cut-Out Switches follows strict manufacturing steps to lock in quality and fit. If your Jeep Grand Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Grand Cherokee A/C Compressor Cut-Out Switches are internal parts that serve in the improvement of the automobile's ac system. These switches are famously used because of their strong construction; they control the discharge pressure of the compressor and shut the supply power in cases of danger. This critical function also guards against any possible harm to the A/C system other than extending the possibility of a Jeep Grand Cherokee's reliability and safe usage. Thus, the first and the second generations of the models of the Jeep Cherokee have been equipped with different types and styles of the A/C Compressor Cut-Out Switches in precise with increased pressure and new operational traditions in the sphere of automobile production. The Jeep Grand Cherokee A/C Compressor Cut-Out Switches fit almost all Grand Cherokee models elaborated by the company, which means that this part is applicable to enhance the efficiency and security of the vehicle in any model year. Amaziness of the fact that contributions made by their means towards protection of the air conditioning system play a great role in the driving lessons to make the occupants feel comfortable regardless the prevailing weather conditions. Moreover, these switches are one of the leading products in the automotive market because of their dependability that Jeeps' customers deem satisfactory. Thus, incorporating new options and preserving the superior quality of performance, the Jeep Grand Cherokee A/C Compressor Cut-Out Switches are ideal examples of high-quality manufacturing and innovation constituting the brand's meaning and making the Grand Cherokee a synonym for luxury SUVs.

Jeep Grand Cherokee A/C Compressor Cut-Out Switches Parts and Q&A

Pressure Switch
4897617AA
Q: What Are A/C Compressor Cut-Out Switches and How Do They Function on Jeep Grand Cherokee?
A:
Before servicing the low pressure sensor/switch, disconnect and isolate the battery negative cable. Separate the wire harness connector from the low pressure cycling clutch switch found at the top of the accumulator. Unfasten the low pressure cycling clutch switch from its top mounting on the accumulator and dispose of the O-ring seal from the accumulator fitting. Put a new O-ring seal on the accumulator fitting, lubricated with clean R-134a oil. During installation, put only special O-rings and refrigerant oil compatible with your vehicle's compressor. Attach the low pressure cycling clutch switch to the accumulator fitting, firmly tightening it by hand, then attach the other end of the wire harness connector to the switch. Usage requires the negative Battery Cable to be reconnected last.
Clutch Cycling Switch
4897613AB
Q: What Are A/C Compressor Cut-Out Switches and How to Service Them on Jeep Grand Cherokee?
A:
Make sure to first disconnect the negative Battery Cable before servicing the high pressure sensor/switch. Pull off the wire harness connector from the high pressure switch which is screwed into the discharge pipe between the compressor and the condenser inlet. Unscrew the high pressure switch from its place in the discharge line fitting and remove and discard its O-ring seal. After installing a fresh O-ring seal on the discharge line fitting with clean R-134a refrigerant oil, use only the particular O-rings given and the correct oil specified in the R-134a installation manual. Afterward, put the high pressure switch on the discharge line fitting, make sure it is nice and tight, reattach the wire harness connector to it and then reconnect the battery negative cable.