How to Service the Rear Brake Disc on 2000 Jeep Grand Cherokee?

Start by lifting your vehicle and prop it up safely and after that, take off the wheel and tire assembly. Following this, remove the caliper anchor bolts and carry the caliper and anchor away as a group, then connect the whole assembly to a neighboring suspension component with a piece of wire to stop the caliper from carrying the brake hose. Following this, handle the retainers that support the brake disc on the axle studs and slide the brake disc from the studs. As part of installation, fit the brake disc on top of the axle studs, add the caliper anchor assembly and tighten the anchor bolts from 90 - 115 Nm (66 - 85 ft. lbs.). Assemble the wheel and tire again, take off the support and drop the car to the ground. Then, continue using the brake pedal until the brake shoes and caliper pistons are flush in the drilled holes.

OEM 2000 Jeep Grand Cherokee Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Discs found

View related parts
2000 Jeep Grand Cherokee Rotor, Rear Part Number: 52098666AA
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Hardware Kit; Disc Brake Rotor; Brake Rotor; Brake Disc
- Position: Rear
- Replaces: 52098666
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52098666AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2000 Jeep Grand Cherokee Rotor Part Number: 52098666
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor; Brake Rotor; Brake Disc; Rotor Brake
- Replaced by: 52098666AA
- Item Weight: 13.00 Pounds
- Item Dimensions: 12.2 x 12.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52098666
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2000 Jeep Grand Cherokee Rotor, Front Part Number: 52098672
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Brake Disc; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Front
- Item Weight: 19.30 Pounds
- Item Dimensions: 12.2 x 12.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52098672
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2000 Jeep Grand Cherokee Brake Disc Parts and Q&A

Q: How to Service the Rear Brake Disc on 2000 Jeep Grand Cherokee?
A: Start by lifting your vehicle and prop it up safely and after that, take off the wheel and tire assembly. Following this, remove the caliper anchor bolts and carry the caliper and anchor away as a group, then connect the whole assembly to a neighboring suspension component with a piece of wire to stop the caliper from carrying the brake hose. Following this, handle the retainers that support the brake disc on the axle studs and slide the brake disc from the studs. As part of installation, fit the brake disc on top of the axle studs, add the caliper anchor assembly and tighten the anchor bolts from 90 - 115 Nm (66 - 85 ft. lbs.). Assemble the wheel and tire again, take off the support and drop the car to the ground. Then, continue using the brake pedal until the brake shoes and caliper pistons are flush in the drilled holes.